DM-ML, DM-FL Descritpion DM-ML and DM-FL actuators are designed for driving round dampers and square multi-blade dampers. Example identification Product code: DM-FL-5-2 voltage Dimensions DM-ML-6 DM-ML-8 2 6 6 1 82 6 6 4 35 18 128 5 27 68 >95 DM-FL-5 573
DM-ML, DM-FL Technical Data Type of actuator Power supply Recommended diameters Ød / max surface m 2 Torque [Nm] Time of movement [s] Angle of rotation [ o ] Universal clamp [mm] DM-ML-6-24 AC/DC 24V 8-4 mm 6 4-95 ø 6-16 DM-ML-6-24-S AC/DC 24V 8-4 mm 6 4-95 ø 6-16 D M - M L - -6-24-RS AC/DC 24V 8-4 mm 6 4-95 ø 6-16 DM-ML-6-2 AC 2V 8-4 mm 6 4-95 ø 6-16 D M - M L - -6-2-S D M - M L - -6-2-RS AC 2V AC 2V 8-4 mm 6 4-95 ø 6-16 8-4 mm 6 4-95 ø 6-16 DM-ML-8-24 AC/DC 24V 2-6 mm 8-95 ø 1-2 1.5 m 2 1-16 DM-ML-8-2 AC 2V 2-6 mm 8-95 ø 1-2 1.5 m 2 1-16 DM-FL-5-24 AC/DC 24V 8-355 mm 5 5-7 - 95 ø 1-16 1, m 2 7-11 DM-FL-5-2 AC 2V 8-355 mm 5 5-7 - 95 ø 1-16 1, m 2 7-11 574
DM-ML-6 Descritpion The actuator DM-ML-6 remote controls throttle ducts. The most popular in the application in round damper with 6Nm torque. Torque 6 Nm allows you to open the damper areas up to 1.2 m2 - which gives the ability to mount them on the dampers with a diameter of up to 4mm. The actuator DM-ML -...- S has an auxiliary contact that in addition to working open/close to set the third positions for example 45% closure. Full control actuator is possible in ML -...- DM-RS, which is adapted to smooth opening and closing using a potentiometer. Example identification Product code: DM-ML-6-2 voltage Dimensions DM-ML-6 6 6 575
DM-ML-6 Technical Data DM-ML-6-24 / DM-ML-6-24-S / DM-ML-6-2 / DM-ML-6-2-S N L On/Off AC1...2V AC24V DC24V DM-ML-6-24-RS / DM-ML-6-2-RS 4 Y1 AC/DC24V 2% DC48V 1% (2)...1V (4)...2mA (2)...1V U N L 3-points control 4 N L AC1...2V (2)...1V (4)...2mA (2)...1V Y1 5 U a 21 22 23 24 25 26 Resistance load 3A, 2V Inductive load 1.5A, 2V The actuator in the O o position b DM-ML-6-24 / DM-ML-6-24-S DM-ML-6-2 / DM-ML-6-2-S DM-ML-6-24-RS DM-ML-6-2-RS power supply AC 24 V 5/6 Hz AC 2 V 5/6 Hz DC 24 V power input 2, W 3,2 W design power 4,4 VA 4,4 VA connection max. 2,mm 2 max. 2,mm 2 torque 6 Nm 6 Nm rotation direction selectable by switch selectable by switch rotation angle - (max. 95 ) - (max. 95 ) rotation time 4 s 4 s noise level 45 db (A) 45 db (A) position indicator mechanical mechanical protection class IP 44 IP 44 ambient temperature - 2... + 5 C - 2... + 5 C allowable humidity 95% RH, non condensing, EN 67-1 95% RH, non condensing, EN 67-1 overload protection automatic automatic S - integrated auxiliary contact giving a signal eg of full opening of the damper RS - analogue control, variable adjustment open/close with a signal from 2 to 1 V 576
DM-ML-8 Descritpion The actuator DM-ML-8 remote controls throttle ducts. The actuator DM-ML-8 with a torque of 8 Nm is applied to the multi-faceted rectangular dampers of up to syrface 1,5m2 or round damper with a diameter of 6mm They are used in installations where there is high pressure. It is possible to mount the actuators DM-ML-8 for standard round dampers such as DATML and DATM that have 4 internal tightnes class or round damper DASML or DASM, which thanks gaskets on flanges are used in applications with high class of air tighntes - D according to PN-EN 12237: 25. Example identification Product code: DM-ML-8-2 voltage Dimensions DM-ML-8 2 6 1 82 6 4 35 18 128 5 27 68 >95 577
DM-ML-8 Technical Data DM-ML-8-24 N L AC1...2V AC24V DC24V N L On/Off 3-points control DM-ML-6-2 N L AC1...2V AC1...2V N L DM-ML-8-24 DM-ML-8-2 power supply AC 24 V 5/6 Hz AC 2 V 5/6 Hz DC 24 V power input 3,5 W 4,5 W design power 7 VA 9 VA connection max. 2,mm 2 max. 2,mm 2 torque 8 Nm 8 Nm rotation direction selectable by switch selectable by switch rotation angle - (max. 95 ) - (max. 95 ) rotation time s s noise level 45 db (A) 45 db (A) position indicator mechanical mechanical protection class IP 44 IP 44 ambient temperature - 2... + 5 C - 2... + 5 C allowable humidity 95% RH, non condensing, EN 67-1 95% RH, non condensing, EN 67-1 overload protection automatic automatic 578
DM-FL-5 Descritpion Actuator DM-FL-5 remote controls throttle ducts. Actuators DM-FL-5 are used for single-blade or multi-blade dampers ventilation of surface to 1,m2 or round damper diameter 355mm. They are mounted on specially prepared bases like DATML round dampers, DASML, DATM from Alnor offer. By using actuators DM-FL-5 it is possible to remotely open and close the air flow in ventilation ducts. Actuators DM-FL-5 equipped with a return spring. Depending on the mounting position of the actuator spring open or close the damper in case of power failure in the system. Example identification Product code: DM-ML-5-2 voltage Dimensions DM-FL-5 579
DM-FL-5 Technical Data DM-FL-5-24 BLK RED 24VAC/DC 1 2 DC24V±1% DM-FL-5-2 BLU BRN 2VAC 1 2 AC24V AC1...2V±1% DM-FL-5-24 DM-FL-5-2 power supply AC 24 V 5/6 Hz AC 2 V 5/6 Hz DC 24 V power input 7,2 W 4,6 W design power 4,4 VA 4,4 VA connection max.,5mm 2 max.,5mm 2 torque 5 Nm 5 Nm rotation direction selectable by switch selectable by switch rotation angle - (max. 95 ) - (max. 95 ) rotation time 5-7 s 5-7 s noise level 45 db (A) 45 db (A) position indicator mechanical mechanical protection class IP 44 IP 44 ambient temperature - 2... + 5 C - 2... + 5 C allowable humidity 95% RH, non condensing, EN 67-1 95% RH, non condensing, EN 67-1 overload protection automatic automatic 58