POPRAWKA do POLSKIEJ NORMY ICS 29.130.10 PN-EN 62271-202:2014-12/AC1 Wprowadza IEC 62271-202:2014/AC1:2015, IDT Wysokonapięciowa aparatura rozdzielcza i sterownicza Część 202: Stacje transformatorowe prefabrykowane wysokiego napięcia na niskie napięcie Poprawka do rmy Międzynarodowej IEC 62271-202:2014/AC1:2015 High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation ma status Poprawki do Polskiej rmy Copyright by PKN, Warszawa 2015 nr ref. PN-EN 62271-202:2014-12/AC1:2015-07 Wszelkie prawa autorskie zastrzeżone. Żadna część niniejszej publikacji nie może być zwielokrotniana jakąkolwiek techniką bez pisemnej zgody Prezesa Polskiego Komitetu rmalizacyjnego
PN-EN 62271-202:2014-12/AC1:2015-07 Przedmowa krajowa Niniejsza poprawka została zatwierdzona przez Prezesa PKN dnia 7 lipca 2015 r. Komitetem krajowym odpowiedzialnym za poprawkę jest KT nr 74 ds. Aparatury Rozdzielczej i Sterowniczej Wysokonapięciowej. Istnieje możliwość przetłumaczenia poprawki na język polski na wniosek zainteresowanych środowisk. Decyzję podejmuje właściwy Komitet Techniczny. W sprawach merytorycznych dotyczących treści normy można zwracać się do właściwego Komitetu Technicznego lub właściwej Rady Sektorowej PKN, kontakt: www.pkn.pl ta uznaniowa Poprawka do rmy Międzynarodowej IEC 62271-202:2014/AC1:2015, przyjęta przez CENELEC decyzją Rady Technicznej, została uznana przez PKN za Poprawkę do Polskiej rmy PN-EN 62271-202:2014-12/AC1:2015-07. 2
IEC 62271-202:2014/COR1:2015 1 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE IEC 62271-202 Edition 2.0 2014-03 IEC 62271-202 Édition 2.0 2014-03 High-voltage switchgear and controlgear Part 202: High-voltage/low-voltage prefabricated substation Appareillage à haute tension Partie 202: Postes préfabriqués haute tension/basse tension CORRIGENDUM 1 Corrections to the French version appear after the English text. Les corrections à la version française sont données après le texte anglais. Figure AA.6 Selection of tests on high voltage interconnections for class IAC-A Replace the existing figure by the following new figure: IEC 62271-202:2014-03/COR1:2015-04(en-fr)
2 IEC 62271-202:2014/COR1:2015 Protection of operators (open doors to HV switchgear) HV interconnections test Protection by HRC current-limiting fuses test Insulated groundshielded type tested Protection by circuit-breaker (no protection) reduced time (2) (1) IEC 62271-200:2011. Reduced values (1) + (2) Reduced current (1) and full time * For phase to ground test the current value to be stated by the manufacturer. * For phase to phase test the current will be 87 % of the rated short-time withstand current. full time (2) The time may be stated by the manufacturers, taking into account the time-setting of the protection. Figure AA.6 Selection of tests on high voltage interconnections for class IAC-A C
IEC 62271-202:2014/COR1:2015 3 Figure AA.7 Selection of tests on high voltage interconnections for class IAC-B Replace the existing figure by the following new figure:
4 IEC 62271-202:2014/COR1:2015 Protection of publics (closed doors) HV interconnections test Protection by HRC current-limiting fuses test Insulated,groundshielded type tested Protection by circuit-breaker (no protection) reduced time (2) Reduced values (1) + (2) Reduced current (1) and full time full time IECIE (1) Applicability of phase to ground or phase to phase test according to the criteria in AA.5.2.1 of IEC 62271-200:2011. * For phase to ground test the current value to be stated by the manufacturer. * For phase to phase test the current will be 87 % of the rated short-time withstand current. (2) The time may be stated by the manufacturers, taking into account the time-setting of the protection. Figure AA.7 Selection of tests on high voltage interconnections for class IAC-B