INFRARED BUILDING HEATING BOARDS

Podobne dokumenty
KONSTRUKCYJNE PŁYTY GRZEWCZE NA PODCZERWIEN

PUSZKI HERMETYCZNE HERMETIC BOXES

KONSTRUKCYJNE PŁYTY GRZEWCZE NA PODCZERWIEN

DM-ML, DM-FL. Auxiliary Equipment and Accessories. Damper Drives. Dimensions. Descritpion

OGRZEWANIE I CHŁODZENIE HEATING AND COOLING

Typ TFP FOR CRITICAL AIR CLEANLINESS AND VERY CRITICAL HYGIENE REQUIREMENTS, SUITABLE FOR CEILING INSTALLATION

Installation screened cables with PVC insulation

Power cables with XLPE insulation

Power cables with PVC insulation

Power cables with XLPE insulation

YKXS, YKXSżo 0,6/1 kv. Kable elektroenergetyczne z izolacją XLPE. Norma IEC :2004. Konstrukcja. Zastosowanie. Właściwości

YAKXS, YAKXSżo 0,6/1 kv. Kable elektroenergetyczne z izolacją XLPE. Norma IEC :2004. Konstrukcja. Zastosowanie.

CATALOGUE CARD LEO S L XL / BMS KARTA KATALOGOWA LEO S L XL / BMS

YKXS, YKXSżo 0,6/1 kv. Kable elektroenergetyczne z izolacją XLPE. Norma IEC :2004. Konstrukcja. Zastosowanie. Właściwości

YAKXS, YAKXSżo 0,6/1 kv. Kable elektroenergetyczne z izolacją XLPE. Norma IEC :2004. Konstrukcja. Zastosowanie.

TECHNICAL CATALOGUE WHITEHEART MALLEABLE CAST IRON FITTINGS EE

Power cables with XLPE insulation

Installation cables with PVC insulation

Power cables screened with PVC insulation

Kable elektroenergetyczne średniego napięcia z izolacją XLPE

YKY, YKYżo 0,6/1 kv. Kable elektroenergetyczne z izolacją PVC. Norma. 10 mm² PN-HD 603 S1:3G >10 mm² IEC :2004. Konstrukcja.

Inquiry Form for Magnets

YAKY, YAKYżo 0,6/1 kv. Kable elektroenergetyczne z izolacją PVC. Norma IEC :2004. Konstrukcja. Zastosowanie. Właściwości

Fixtures LED HEDRION

Power cables with XLPE insulation

Szafa mroźnicza Freezing cabinet. Typ Type. Dane techniczne Technical data. Model Model SMI 04. SMI 04 Indus. Strona 1/9 Page 1/9

Power cables with PVC insulation

Przewody elektroenergetyczne z izolacją XLPE

Tablice zmiennej treści Variable message boards UOPG6. Power of supply: Enclosure: Colour (Chrominance): Beam width: Luminance: Luminance ratio:

EURO Plus DALI TRACK 3F Track 3F

Post low voltage insulators

miniature, low-voltage lighting system MIKRUS S

Przewody elektroenergetyczne z izolacją XLPE

ul. Bukowska Dąbrowa

YKXS, YKXSżo 0,6/1 kv. Kable elektroenergetyczne z izolacją XLPE. Norma IEC :2004. Konstrukcja. Zastosowanie. Właściwości

Listwa przypodłogowa LP-55 dla ceniących estetykę i funkcjonalność

OKUCIA DO ZABUDÓW PT 10 OKUCIA DO ZABUDÓW CAŁOSZKLANYCH

ETNA BOXES DO KABIN PRYSZNICOWYCH SHOWER. Zawiasy i klamry do kabin prysznicowych Shower hinges and clamps AKCESORIA ACCESSORIES

OKUCIA DO ZABUDÓW PT 10 OKUCIA DO ZABUDÓW CAŁOSZKLANYCH

Rev Źródło:

RCS 03 Scorpion. Dane techniczne Technical data RCS 03. Strona 1/8 Page 1/8. Typ Type. Regał chłodniczy Cooling multideck

Listwy LED L E D s l a t s

Typ MFPCR FOR THE MOST DEMANDING REQUIREMENTS ON THE PURITY OF INDOOR AIR, WORKSTATIONS, AND DEVICES

system OPEN LED ES-SYSTEM

VENEZIA BOXES DO KABIN PRYSZNICOWYCH SHOWER. Zawiasy i klamry do kabin prysznicowych Shower hinges and clamps AKCESORIA ACCESSORIES

Osprzęt siłowy, przedłużacze, rozdzielnice

Typ VME FOR THE MEASUREMENT OF VOLUME FLOW RATES IN DUCTS

AKCESORIA DO KABIN PRYSZNICOWYCH SHOWER ENCLOSURES FITTINGS VESUVIO

Trójfazowe silniki klatkowe wysokosprawne NEMA EPACT do pomp JM/JP seria STe/ESg-JM/JP

OPIS KONSTRUKCJI DESIGN DESCRIPTION

NEW COLLECTION. Nowe kolekcje 25 x 75. NPD News 2015

CENTRALE WENTYLACYJNE

11. Centrale wentylacyjne OnyX/Compact ventilation units OnyX

IR3000, IR4500, IR6000

rozwiązania profesjonalne / outdoor apply czarny / black czarny / black

Klimatyzatory ścienne i kasetonowe YORK. Cennik 2013

ONTEC A MINIMALISTYCZNA FORMA KRYJE MAKSIMUM MOCY MINIMALIST DESIGN HIDING MAXIMUM POWER

ASSEMBLY AND SERVICE INSTRUCTION

YKY, YKYżo 0,6/1 kv. Kable elektroenergetyczne z izolacją PVC. Norma. 10 mm² PN-HD 603 S1:3G >10 mm² IEC :2004. Konstrukcja.

Pokrywa kołnierza ø120 z tuleją 1½ oraz ø180 z tuleją 2. Flange Cover ø120 with 1 ½ Sleeve and ø180 with 2 Sleeve. Instrukcja montażu

itech IMPONUJĄCY OBSZAR ŚWIECENIA DZIĘKI TYLKO JEDNEJ OPRAWIE ZE ŹRÓDŁEM ŚWIATŁA POWER LED 3W/9W.

HOL DOLNY / LOWER LOBBY

VESUVIO VESUVIO. Zawiasy i klamry do kabin prysznicowych Shower hinges and clamps AKCESORIA DO KABIN PRYSZNICOWYCH SHOWER BOXES ACCESSORIES

OSPRZĘT ELEKTROINSTALACYJNY PUSZKI PODTYNKOWE ODGAŁĘŹNIKI HERMETYCZNE ZŁĄCZKI AKCESORIA

ROZPRAWA DOKTORSKA. Model obliczeniowy ogrzewań mikroprzewodowych

AKCESORIA DO KABIN PRYSZNICOWYCH SHOWER ENCLOSURES FITTINGS ETNA

Zwora Yale US06. Yale seria US kg. Zastosowanie. Właściwości. Parametry techniczne

SZYBKIE OGRZEWANIE PODŁOGOWE POMIARY PARAMETRÓW CIEPLNYCH

Detal 1 / Detail 1. FR1 Door frame. FR2 Maskownica FR2 Cover. Detal 2 / Detail 2. FR2 Maskownica FR2 Cover. FR1 Door frame.

12 OPTOTECHNIKA BELINTRA DISTRIBUTION OF MEDICATION I MEDICART ACCESSORIES TRANSPORT MEDYKAMENTÓW I MEDICART AKCESORIA MEDICART.

Karta Katalogowa Catalogue card

G14L LPG toroidal tank

EL-MECH-PLAST UL. MICKIEWICZA 108, JASŁO tel Strona 0

Rev Źródło:

AGREGATY W WERSJI CHŁODZĄCEJ I POMPY CIEPŁA

DELTA 600 corner left with TÜV certi ed

KOLEKCJE PŁYTEK CERAMICZNYCH COLLECTIONS OF CERAMIC TILES

DELTA 600 corner right with TÜV certi ed

Puszki natynkowe typu P Facing wall boxes - P type Norma / norm: PN-EN P-1 ze złączką 4 x 2,5 mm 2 P-1 with connection 4 x 2,5 mm 2 C C C

MODULAR STAIRS. asta FOR SELF ASSEMLBY

Profile aluminiowe Systemy podnoszenia szyb do lad i witryn przeszklonych

Kable bezhalogenowe nierozprzestrzeniające płomienia

BLACKLIGHT SPOT 400W F

LG Quick-Release Pins

OPRAWY ARCHITEKTONICZNE LED ARCHITECTURAL LED FIXTURES

For choosen profiles, KLUS company offers end caps with holes for leading power supply cable. It is also possible to drill the end cap independently

Robotic Arm Assembly Manual

EXAMPLES OF CABRI GEOMETRE II APPLICATION IN GEOMETRIC SCIENTIFIC RESEARCH

η 86-95% Robust luminaire, IP23 for T5 and T8 tubes made of galvanized steel.

ONTEC C DYSKRETNA OCHRONA

LED WASHER 30x3W WHITE IP65 F

The analysis of the energy demand for heating and cooling of the house built on the basis of the traditional Canadian wood-frame construction

TYRE PYROLYSIS. REDUXCO GENERAL DISTRIBUTOR :: ::

Veles started in Our main goal is quality. Thanks to the methods and experience, we are making jobs as fast as it is possible.

itech IMPONUJĄCY OBSZAR ŚWIECENIA DZIĘKI TYLKO JEDNEJ OPRAWIE ZE ŹRÓDŁEM ŚWIATŁA POWER LED 2W/5W.

Przek adniki napi ciowe izolowane 1-biegunowo kv. Indoor installation Epoxy resin encapsulation for measurementand protection equipments

ARCHITECTURAL LED FIXTURES OPRAWY ARCHITEKTONICZNE LED.

WENTYLATORY PROMIENIOWE SINGLE-INLET DRUM BĘBNOWE JEDNOSTRUMIENIOWE CENTRIFUGAL FAN

ONTEC A MINIMALISTYCZNA FORMA KRYJE MAKSIMUM MOCY MINIMALIST DESIGN HIDING MAXIMUM POWER

W trzech niezależnych testach frezy z powłoką X tremeblue typu V803 był w każdym przypadku prawie 2 razy bardziej wydajne niż wersja niepowlekana.

Transkrypt:

INFRARED BUILDING HEATING BOARDS

INFRARED BUILDING HEATING BOARDS Electric cables at the back of the Heat Decor board Electric cables at the side of the Heat Decor board Heat Decor boards are infrared electrical heaters which can be used by decoration materials. Heat Decor boards are designed for internal wall constructions, ceilings and floors for dry walls systems. The boards are adapted for putting, painting, decoration with ceramic and stone sidings - in dry spaces and spaces with increased humidity. The board have built inside electrical energy saving system - Ecoline, which decreases electrical energy consumption proportionally to the rise of the board s temperature. The boars are easy and quick to install and very functional as infrared surface heating. Heating by Heat Decor boards allows discretion of designing and interior arrangement. The construction of Heat Decor board consists of the mixture of magnesian cement, covered with fibreglass, with the carbonate heating system built inside. The boards have normative endurance parameters and high heating efficiency. The heating board consists of two separate heating element (P1, P2), each of them with separate electric power supply at the back or side of the board, each of them can be used separately (by cutting the board) or as one bigger board. The heating elements are marked by a red, dashed line (heating surface) on the board surface. -2-

FUNCTIONALITY of infrared building heating boards 2 1. Cutting down of the board to size required 3 2. Cutting the board into two separate heating boards 1 3. Elektric box 4. Elekctric socket 5. Self tapping screws 6. Heating surface 5 6 The construction of the heating board allows: its cutting down to size required, separation of the board into two separate heating units (along with the dashed line separating heating surfaces), instalment of the electric sockets, boxes, temperature sensors or decoration elements beyond the heating surface of the board (marked on the board in red line), joining of the heating boards in series or parallel connection to get the required heating surface. 4 Heat Decor heating boards can be assembled to the construction of the dry building with the usage of the sheet metal screws used beyond the heating surface. The heating surface (marked in red line) shows the border zone on which boring holes, piercing and other damaging act are not allowed. -3-

USAGE of infrared building heating boards Wall heating on steel construction (covering wall) - spaces with increased humidity 1. Heat Decor heating board 2. Steal construction - for dry walls systems 3. Cable for installation Heat Decor board 4. A hole in a steal structure for an installation cable 5. Mineral wool insulation 6. Water vapour barrier 7. Self tapping screws 8. Fully flexible joint sealant 9. Waterproofing with liquid rubber 10. Grouts layer 11. Fully flexible glue for ceramic and stone tiles class C2TE S1 12. Surface finish of ceramic or stone plates cm 2 1 8 12 11 10 9 7 6 5 4 3-4- -4-

Wall heating on steel construction (partition wall) - dry spaces 1. Heat Decor heating board 2. Heat Decor heating board 3. Steal construction - for dry walls systems 4. Cable for installation Heat Decor board 5. A hole in a steal structure for an installation cable 6. Mineral wool insulation 7. Water vapour barrier 8. Self tapping screws 9. Elastic gypsum putty with reinforcement tape 10. Grouts layer 11. Fully flexible gypsum putty 12. Paint finish (with layer grouts) cm 3 1 12 11 10 9 8 2 7 6 5 4-5-

Ceiling heating on steel construction 1. Heat Decor heating board 2. Steal construction - for dry walls systems 3. Elektric box - for Heat Decor board installation and power supply 4. Cable for installation Heat Decor board 5. Water vapour barrier 6. Mineral wool insulation 7. Self tapping screws 8. Elastic gypsum putty with reinforcement tape 9. Grouts layer 10. Fully flexible gypsum putty 11. Paint finish (with grouts layer) 4 3 cm 6 5 2 1 8 7 9 10 11-6-

Underfloor heating 1. Heat Decor heating board 2. Concrete or wooden construction 3. Full lfecible glue over the entire surface class C2TE S1 4. Elektric box - for Heat Decor board installation and power supply 5. Fully flexible joint sealant 6. Waterproofing with liquid rubber in the case of spaces with increased humidity 7. Grouts layer 8. Fully flexible glue for ceramic and stone tiles class C2TE S1 in the case of sticking floor 9. Floor material 4 1 7 8 9 5 6 2 3-7-

ENERGY SAVINGS of infrared building heating boards Electic energy consumption in relations to the board s temperature by the example of Heat Decor Ecoline E- Board Heat Decor heating boards are highly ecological Heat Decor board s temperature 10 C 20 C 30 C C 50 C C Energy saving Heat Decor Ecoline board Electric energy consumption [W] [%] 318,12 292,38 277,53 262, 255,09 100 96, 88, 84,10 79,50 77,30 Diagrammatic presentation of the electic energy consumption in relations to the Heat Decor board s temperature 0 Electric energy consumption [W] 375 0 325 300 275 250 Energy saving Heat Decor Ecoline board 225 200 0 C 10 C 20 C 30 C C 50 C C PERFORMANCE Thermal image of the surface heating by Heat Decor board. Even heat distribution and high efficiency of surface heating. C 16 C -8-

STEROWANIE płyt grzewczych Montaż w puszce podtynkowej nr kat. Model Wymiary [mm] -10- Sterowanie płytami Heat Decor odbywa się przy użyciu elektronicznych termostatów wyposażonych w czujniki temperatury powietrza oraz w czujniki temperatury podłogi, w przypadku ogrzewania podłogowego. Podstawową funkcją termostatów jest utrzymywanie komfortowej temperatury w pomieszczenia oraz oszczędzanie energii elektrycznej poprzez ciągłą kontrolę ustawionej temperatury. System sterowania płytami Heat Decor stosowany jest formie przewodowej lub bezprzewodowej. Bezprzewodowe sterowanie ogrzewaniem funkcjonuje dzięki połączeniu termostatu bezprzewodowego oraz odbiorników z funkcją wzajemnej komunikacji. Odbiorniki komunikują się z termostatem otrzymując sygnał włączenia lub wyłączenia ogrzewania. Odbiorniki montowane są w sposób natynkowy lub podtynkowy, co umożliwia duża swobodę aranżacji wnętrza. Zarządzanie cyklami grzewczymi oraz temperaturą pomieszczenia odbywa się z poziomu termostatu, komputera, tabletu lub telefonu. Z jednego urządzenia zarządzamy wszystkimi ogrzewanymi pomieszczeniami. Bezprzewodowa metoda sterowania płytami Heat Decor tworzy system inteligentnego Domu z funkcją energooszczędnego ogrzewania płaszczyznowego. Przewodowe sterowanie ogrzewaniem odbywa się poprzez pojedynczy przewodowy termostat montowany na ścianie. Temperatura pomieszczenia oraz nr cykle grzewcze programowane się bezpośrednio w termostacie. Model To kat. najprostsza forma sterowania ogrzewaniem płaszczyznowym Heat Decor, cechuje ją szybki montaż i prosta obsługa ogrzewania. -9-

KINDS OF BOARDS Dimensions and parameters R1 R2 R1 F C B P1 P2 E H D D Infrared building heating boards Heat Decor Ecoline - electric cable at the back side of the board A cat. nr Model Dimensions [mm] A B C D E F R1 R2 H Heating power [W] Using Max Weight [kg] 1. Heat Decor E-4 20 2120 1 1 P1: P2: 4 2. Heat Decor E- 20 1620 450 P1:165 P2:165 3. Heat Decor E- 20 950 4. Heat Decor E-/12 ~19 5. Heat Decor EF-4 20 2120 1 1 P1: P2: 4 ~48 6. Heat Decor EF- 20 1620 450 P1:165 P2:165 ~48 7. Heat Decor EF- 20 950 ~48 8. Heat Decor EF-/12 ~24 Infrared building heating boards Heat Decor Powerline - electric cable at the back side of the board cat. nr Model Dimensions [mm] A B C D E F R1 R2 H Heating power [W] Using Max Weight [kg] 51. Heat Decor P-800 20 2120 1 1 P1:0 P2:0 800 52. Heat Decor P-0 20 1620 450 P1:300 P2:300 0 53. Heat Decor P-0 20 950 P1:200 P2:200 0 54. Heat Decor P-0/12 P1:200 P2:200 0 ~19-10-

KINDS OF BOARDS Dimensions and parameters R1 R2 R1 F C B P1 P2 E H D D Infrared building heating boards Heat Decor Ecoline - electric cable at the side of the board A cat. nr Model Dimensions [mm] A B C D E F R1 R2 H Heating power [W] Using Max Weight [kg] 9. Heat Decor ES-4 20 2120 1 1 P1: P2: 4 10. Heat Decor ES- 20 1620 450 P1:165 P2:165 11. Heat Decor ES- 20 950 12. Heat Decor ES-/12 ~19 13. Heat Decor EFS-4 20 2120 1 1 P1: P2: 4 ~48 14. Heat Decor EFS- 20 1620 450 P1:165 P2:165 ~48 15. Heat Decor EFS- 20 950 ~48 16. Heat Decor EFS-/12 ~24 Infrared building heating boards Heat Decor Powerline - electric cable at the side of the board cat. nr Model Dimensions [mm] A B C D E F R1 R2 H Heating power [W] Using Max Weight [kg] 55. Heat Decor PS-800 20 2120 1 1 P1:0 P2:0 800 56. Heat Decor PS-0 20 1620 450 P1:300 P2:300 0 57. Heat Decor PS-0 20 950 P1:200 P2:200 0 58. Heat Decor PS-0/12 P1:200 P2:200 0 ~19-12-

TECHNICAL PARAMETERS of infrared building heating boards The kind of heating Heating element Rated voltage Power supply The length of electric cords Protection against externals penetration Cover material Fire resistance of the cover The usage of heating boards for internal constructions Possible finishing of the boards Endurance for burdening with objects fixed to the boards (force applied by a single assembly pin Molly) Bending strength Compression strength Acoustics Thermal conductivity of the heating board s isolation side λ [W/mK] IR infra-red waves Carbonic Fibre 230V, 50Hz two independent sources (for two heating zones) 3 m IP X5 Magnesian cement with fibreglass A2-s1, d0 cover (overlay) of walls, partition walls, ceilings, floors (in both dry spaces as well as in spaces with increased humidity) putting, painting, decoration with ceramic or stone sidings 1,7 kn pulling out (173 kg) 2,5 kn on the wall (255 kg) F7 C12 19 db 0,155 Dimension stability in different atmospheric and moisture conditions (temperature.: + C, humidity % and temperature.: -20 C Length and width 0,02 % Thickness 1 % INFRARED BUILDING HEATING BOARDS Heat Decor heating boards are highly ecological Heat Decor ul. Cystersów 3, Kraków POLAND Tel: +48 12 7 61 34 www.heatdecor.com biuro@heatdecor.com TECHNOLOGY PATENTED, ALL RIGHTS RESERVED.