Projekt współfinansowany ze środków Europejskiego Funduszu Rozwoju Regionalnego w ramach Programu Operacyjnego Inteligentny Rozwój PD066-011_Pakiet - Publiczny Oświęcim, dnia 09.02.201 r. Dotyczy postępowania: PD066-011 pt.: ZAKUP/WYTWORZENIE, DOSTAWA ORAZ MONTAŻ I URUCHOMIENIE LINII ROZLEWNICZEJ O WYDAJNOŚCI MIN. 6000 SZT/H w ramach projektu: "Rozbudowa Centrum Badawczo Rozwojowego Synthos S.A. w zakresie innowacyjnych produktów chemicznych" POIR.02.01.00-00-012/15-00 PYTANIA I ODPOWIEDZI, WYJAŚNIENIA, WNIOSKI, ZMIANY DO TREŚCI ZAPYTANIA I UMOWY Informujemy, iż Zamawiający przedstawia poniżej treść pytań i udzielonych odpowiedzi/wyjaśnień/zmian do treści w postępowaniu na wyżej opisany zakres przedmiotowy. Zmiana 10 Zamawiający zmienia termin dostawy urządzenia określony w punkcie 3.f Zaproszenia do złożenia ofert, w związku z tym punkt 3.f otrzymuje brzmienie: f) termin dostawy materiałów niezbędnych do wykonania Przedmiotu Umowy na teren Zamawiającego nastąpi do dnia 31.03.2018 Było: Ofertę należy składać na załączonym formularzu (załącznik c ). Oferta powinna zawierać m.in.: a) pełną nazwę oferenta, b) adres lub siedzibę oferenta, numer telefonu, NIP oraz aktualny odpis z KRS, c) dane adresowe (telefon, email) osoby wyznaczonej do kontaktu z Zamawiającym, d) informacje techniczne o oferowanych urządzeniach, w odniesieniu do załącznika a i a2, (do uzupełnienia plik excel), e) wszystkie niezbędne dane umożliwiające Zamawiającemu ocenę Oferty wg Kryteriów oceny zawartych w punkcie 13 niniejszego zaproszenia tj.: a. cenę netto, która powinna zawierać wszystkie elementy niezbędne do rozruchu i do właściwej eksploatacji oraz elementy wymienione w Specyfikacji wymagań użytkownika stanowiącej załączniki a i a2. Ponadto oferent zapewnia transport DDP Kraków, Jagiellońskie Centrum Innowacji,lub DAP Kraków, Jagiellońskie Centrum Innowacji (wg Incoterms 2010), przeglądy gwarancyjne, montaż na budowie w miejscu posadowienia, nadzory i próby odbiorowe oraz opcjonalnie z rozładunkiem i wniesieniem do pomieszczeń JCI b. informacje o spełnieniu lub nie Wymagań opcjonalnych, c. informację o rozładunku i wniesieniu urządzenia do pomieszczenia na terenie Zamawiającego, d. informacje niezbędne do określenia zapotrzebowania na gaz w Nl/h, przy wydajności ampułek 6000 szt./h, f) termin dostawy materiałów niezbędnych do wykonania Przedmiotu Umowy na teren Zamawiającego nastąpi do dnia 30.10.201, g) okres gwarancji (minimum 24 miesiące z możliwością przedłużenia licząc od daty podpisania protokołu odbioru końcowego), h) termin ważności oferty (minimum 60 dni od daty otrzymania oferty przez Zamawiającego), i) kod taryfy celnej (CN), j) warunki płatności - 30 dni po otrzymaniu faktury przez Zamawiającego, k) oferta musi być podpisana przez osobę lub osoby uprawnione do występowania w obrocie prawnym w imieniu oferenta. Podpis musi być czytelny lub opisany pieczęciami imiennymi. PD066-011_Pakiet Publiczny
Projekt współfinansowany ze środków Europejskiego Funduszu Rozwoju Regionalnego w ramach Programu Operacyjnego Inteligentny Rozwój PD066-011_Pakiet Publiczny Jest: Ofertę należy składać na załączonym formularzu (załącznik c ). Oferta powinna zawierać m.in.: l) pełną nazwę oferenta, m) adres lub siedzibę oferenta, numer telefonu, NIP oraz aktualny odpis z KRS, n) dane adresowe (telefon, email) osoby wyznaczonej do kontaktu z Zamawiającym, o) informacje techniczne o oferowanych urządzeniach, w odniesieniu do załącznika a i a2, (do uzupełnienia plik excel), p) wszystkie niezbędne dane umożliwiające Zamawiającemu ocenę Oferty wg Kryteriów oceny zawartych w punkcie 13 niniejszego zaproszenia tj.: a. cenę netto, która powinna zawierać wszystkie elementy niezbędne do rozruchu i do właściwej eksploatacji oraz elementy wymienione w Specyfikacji wymagań użytkownika stanowiącej załączniki a i a2. Ponadto oferent zapewnia transport DDP Kraków, Jagiellońskie Centrum Innowacji,lub DAP Kraków, Jagiellońskie Centrum Innowacji (wg Incoterms 2010), przeglądy gwarancyjne, montaż na budowie w miejscu posadowienia, nadzory i próby odbiorowe oraz opcjonalnie z rozładunkiem i wniesieniem do pomieszczeń JCI b. informacje o spełnieniu lub nie Wymagań opcjonalnych, c. informację o rozładunku i wniesieniu urządzenia do pomieszczenia na terenie Zamawiającego, d. informacje niezbędne do określenia zapotrzebowania na gaz w Nl/h, przy wydajności ampułek 6000 szt./h, q) termin dostawy materiałów niezbędnych do wykonania Przedmiotu Umowy na teren Zamawiającego nastąpi do dnia 31.03.2018, r) okres gwarancji (minimum 24 miesiące z możliwością przedłużenia licząc od daty podpisania protokołu odbioru końcowego), s) termin ważności oferty (minimum 60 dni od daty otrzymania oferty przez Zamawiającego), t) kod taryfy celnej (CN), u) warunki płatności - 30 dni po otrzymaniu faktury przez Zamawiającego, v) oferta musi być podpisana przez osobę lub osoby uprawnione do występowania w obrocie prawnym w imieniu oferenta. Podpis musi być czytelny lub opisany pieczęciami imiennymi. Zmiana 11 W związku ze zmiana nr. 10 Zamawiający uaktualnia Załącznik c do Zaproszenia w punkcie. Było: Jest: Termin dostawy materiałów niezbędnych do wykonania Przedmiotu Umowy na teren Zamawiającego nastąpi do dnia 30.10.201 (wypełnić) Termin dostawy materiałów niezbędnych do wykonania Przedmiotu Umowy na teren Zamawiającego nastąpi do dnia 31.03.2018 (wypełnić) PD066-011_Pakiet
Projekt współfinansowany ze środków Europejskiego Funduszu Rozwoju Regionalnego w ramach Programu Operacyjnego Inteligentny Rozwój PD066-011_Pakiet Publiczny Zmiana 12 W związku z w/w zmianą oraz zmianami wprowadzonymi przez Pakiet 6 - po NDA, Zamawiający wydłuża termin składania Ofert do dnia: Ofertę należy złożyć w terminie 6.03.201 do godziny 23.59 na adres e-mail: pawel.z@abindustry.com, dominik.demehlem@synthosgroup.com oraz w zamkniętej kopercie na adres: AB Industry S.A., al. Tysiąclecia Państwa Polskiego 13 24-110 Puławy, Paweł Zawadziński z dopiskiem: Zapytanie ofertowe nr PD066-011"wraz z dopiskiem oferta nie otwierać W związku z ww. zmianami wycofuje się Zaproszenie do złożenia oferty opublikowane w dn.: 10.01.201 o nazwie: PD066-011-Zaproszenie_do_zlozenia_oferty i zastępuje się je nowym, załączonym do niniejszego Pakietu o nazwie: PD066-011-Zaproszenie_do_zlozenia_oferty REW1 Zamawiający informuje również, iż Oferentom, którzy złożyli już oferty przysługuje prawo wycofania złożonej oferty oraz prawo złożenia nowej, jeżeli uznają oni, iż w/w zmiana wpływa na ich treść. Pytania i odpowiedzi, zmiany oraz wyjaśnienia do treści Zapytania, stanowią integralną część dokumentacji postępowania. Załączniki: 1. PD066-011-Zaproszenie_do_zlozenia_oferty REW1 PD066-011_Pakiet
Project co-financed by the European Regional Development Fund within the framework of the Smart Growth Operational Programme Oświęcim, date 09 February 201 INVITATION TO TENDER FOR: PD066-011: PURCHASE/MANUFACTURING, DELIVERY, ASSEMBLY AND START-UP OF A FILLING LINE WITH A MIN. OUTPUT OF 6000 PCS./H. "Expansion of the Research and Development Center at Synthos S.A. in the scope of innovative chemical products" POIR.02.01.00-00-012/15-00 QUESTIONS AND ANSWERS, CLARIFICATIONS, CONCLUSIONS, CHANGES THE CONTENT OF INVITATION TO TENDER AND CONTRACT Please be advised that the Purchaser presents below the content of the questions and answers / clarifications / changes to the content in the procedure on the above-described scope Change 10: Purchaser changes the date of delivery of the equipment specified in section 3.f invitations to tender in connection with this point 3.f replaced by the following: "f) the materials necessary for performance of the Object of Contract at the Contracting Authority's site shall be delivered by 03.31.2018" Was: The tender is to be submitted according to the attached form (appendix "c"). The tender shall contain the following: a) full name of tenderer, b) tenderer's address or headquarters, telephone number, NIP (Taxpayer ID No.) and current copy of data from the National Court Register, c) contact information (telephone, e-mail) of person designated for contact with the Contracting Authority, d) technical information about offered equipment, in reference to appendix "a", (excel file to be filled out), e) all data indispensable for the Contracting Authority to evaluate the Tender according to the Evaluation Criteria contained in section 12 of this invitation, i.e.: a. net price, which shall contain all elements required for start-up and proper operation as well as the elements listed in the Specification of user's requirements constituting appendix "a" and a2. Furthermore, the tenderer provides DDP or DAP transport to Kraków, Jagiellońskie Centrum Innowacji (according to Incoterms 2010), guarantee inspections, assembly at the site, monitoring and acceptance tests optionally with unloading and transport to the installation site at JCI, b. information on fulfillment of optional Requirements or lack thereof, c. information concerning unloading and transport of the machine to the Contracting Authority's installation site, d. information required for determining demand for gas in Nl/h, with a ampoule output of 6000 pcs/h,
Project co-financed by the European Regional Development Fund within the framework of the Smart Growth Operational Programme f) the materials necessary for performance of the Object of Contract at the Contracting Authority's site shall be delivered by 30/10/201, g) guarantee period (minimum 24 months with possibility of extension, counted from the signing date of the final acceptance certificate), h) tender's period of validity (minimum 60 days from the date of tender receipt by the Contracting Authority), i) customs tariff code (CN), j) terms of payment - 30 days after the Contracting Authority receives an invoice, k) the tender must be signed by the person or persons legally authorized to represent the tenderer. The signature must be legible or described by name stamps. Is: The tender is to be submitted according to the attached form (appendix "c"). The tender shall contain the following: a) full name of tenderer, b) tenderer's address or headquarters, telephone number, NIP (Taxpayer ID No.) and current copy of data from the National Court Register, c) contact information (telephone, e-mail) of person designated for contact with the Contracting Authority, d) technical information about offered equipment, in reference to appendix "a", (excel file to be filled out), e) all data indispensable for the Contracting Authority to evaluate the Tender according to the Evaluation Criteria contained in section 12 of this invitation, i.e.: a. net price, which shall contain all elements required for start-up and proper operation as well as the elements listed in the Specification of user's requirements constituting appendix "a" and a2. Furthermore, the tenderer provides DDP or DAP transport to Kraków, Jagiellońskie Centrum Innowacji (according to Incoterms 2010), guarantee inspections, assembly at the site, monitoring and acceptance tests optionally with unloading and transport to the installation site at JCI, b. information on fulfillment of optional Requirements or lack thereof, c. information concerning unloading and transport of the machine to the Contracting Authority's installation site, d. information required for determining demand for gas in Nl/h, with a ampoule output of 6000 pcs/h, f) the materials necessary for performance of the Object of Contract at the Contracting Authority's site shall be delivered by 31/03/2018, g) guarantee period (minimum 24 months with possibility of extension, counted from the signing date of the final acceptance certificate), h) tender's period of validity (minimum 60 days from the date of tender receipt by the Contracting Authority), i) customs tariff code (CN), j) terms of payment - 30 days after the Contracting Authority receives an invoice, k) the tender must be signed by the person or persons legally authorized to represent the tenderer. The signature must be legible or described by name stamps.
Project co-financed by the European Regional Development Fund within the framework of the Smart Growth Operational Programme Change 11: Due to the change No. 10 Employer updates the Appendix "c" in step to Invitations Was: Deadline for delivery of materials necessary for the execution of the contract on site will take place on 30.10.201 Is: Deadline for delivery of materials necessary for the execution of the contract on site will take place on 31.03.201 Change 12: Due to above changes, Customer extends the deadline for submission: Tender is to be submitted by 6/03/201, by 11:59 P.M. to the e-mail address: pawel.z@abindustry.com, dominik.demehlem@synthosgroup.com and in a sealed envelope to the address: AB Industry S.A. al. Tysiąclecia Państwa Polskiego 13 24-110 Puławy, Paweł Zawadziński with the annotation: "Invitation to tender no. PD066-011" along with the annotation "tender do not open" In connection with the above mentioned changes withdraws Invitation to tender published at: 10/01/201 named: PD066-011-Invitation_to_tender_EN and replaced by a new, attached to this package called: PD066-011-Invitation_to_tender_EN REW1 Customer informs also that the Bidders who have already filed the offer are entitled to withdraw the submitted tender and the submin to a new one, if they consider that above-described change affects their content. Questions and answers, changes and clarifications to the content of the invitation to tender, are an integral part of the documentation procedure. Appendix: 1. PD066-011-Invitation_to_tender_EN REW1