1) Umowa 2316/B/T02/2011/40, Politechnika lska, promotorski, kierownik projektu, zakwalifikowany do finansowania, data zakoczenia

Załcznik 4 Prof. zw. dr hab. in. Leszek Adam Dobrzaski M.dr h.c. Zakoczone w okresie ostatnich 5 lat i aktualnie realizowane projekty badawcze (numery projektów, ródła finansowania, miejsce realizacji, charakter udziału przy realizacji projektu oraz wykaz najwaniejszych publikacji bdcych efektem realizacji kadego z projektów) 1) Umowa 2316/B/T02/2011/40, Politechnika lska, promotorski, kierownik projektu, zakwalifikowany do finansowania, data zakoczenia 24.05.2013 2) NN 508 590039, Politechnika lska, własny, wykonawca, data zakoczenia 26.12.2012 3) NN 507 422136, Politechnika lska, promotorski, kierownik projektu, data zakoczenia 26.09.2011 L.A. Dobrzaski, A.J. Nowak, W. Błaejewski, R. Rybczyski, Non-standard test methods for long-fibrous reinforced composite materials, Archives of Materials Science and Engineering, Vol. 47/1 (2011) s. 5-10 L.A. Dobrzaski, A.J. Nowak, W. Błaejewski, R. Rybczyski, The concept of preparation of oesophageal prosthesis based on longfiber composite material, Journal of Achievements In Materials and Manufacturing Engineering, Vol. 46/1 (2011) s. 18-24 L.A. Dobrzaski, A. Pusz, A.J. Nowak, M. Górniak, The preparation of aramid fibres in silicone based composite materials, Journal of Achievements In Materials and Manufacturing Engineering, Vol. 45/2 (2011) s. 125-131 L.A. Dobrzaski, A. Pusz, A.J. Nowak, M. Górniak, Application of FEM for solving various issues in material engineering, Journal of Achievements In Materials and Manufacturing Engineering, Vol. 42/1-2 (2010) s. 134-141 L.A. Dobrzaski, A. Pusz, A.J. Nowak, M. Górniak, Constructional model of internal oesophageal prosthesis, Archives of Materials Science and Engineering, Vol. 42/2 (2010) s. 69-76 4) N 507 402335, Politechnika lska, promotorski, kierownik projektu, data zakoczenia 14.10.2011 L.A. Dobrzaski, A. Tomiczek, A. Nabiałek, Z. Stokłosa, Magnetic properties of magnetostrictive Tb0.3Dy0.7Fe1.9 / polyurethane composite materials, IEEE Transaction in Magnetics (w druku) A. Tomiczek, L.A. Dobrzaski, Struktura i własnoci materiałów kompozytowych wykazujcych gigantyczn magnetostrykcj, Szkoła Inynierii Materiałowej 2011 (w druku) L.A. Dobrzaski, A. Tomiczek, B. Zibowicz, A. Nabiałek, Influence of the manufacturing technology on the properties of magnetostrictive composite materials, Journal of Mechanical Engineering/International Journal of Microstructure and Materials Properties (w druku). L.A. Dobrzaski, A. Tomiczek, W. Pacyna, P. Kwapuliski, Dynamic magnetic properties of magnetostrictive Tb0.3Dy0.7Fe1.9 / polyurethane composite materials, Achievements in Mechanical and Materials Engineering AMME (w druku) L.A. Dobrzaski, A. Tomiczek, A. Nabiałek, R. uberek, Structure and magnetic properties of magnetostrictive Td0.3Dy0.7Fe1.9 / polyurethane composite materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43/2 (2010) s. 527-532 L.A. Dobrzaski, A. Wydrzyska, O. Iesenchuk, R. uberek, Magnetostrictive properties of epoxy-bonded Tb0.3Dy0.7Fe1.9 composites, Advanced Materials Research, Vol. 89-91 (2010) s. 633-638 L.A. Dobrzaski, A. Tomiczek, B. Tomiczek, A. lawska-waniewska, O. Iesenchuk, Polymer matrix composite materials reinforced by Tb0.3Dy0.7Fe1.9 magnetostrictive particles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37/1 (2009) s. 16-23 L.A. Dobrzaski, A. Wydrzyska, O. Iesenchuk, Intelligent epoxy matrix composite materials consisting of Tb0.3Dy0.7Fe1.9 magnetostrictive particulates, Archives of Materials Science and Engineering, Vol. 35/1 (2009) s. 33-38 5) NN 507 470137, Politechnika lska, własny, wykonawca, data zakoczenia 01.10.2011 Z. Brytan, L.A. Dobrzaski, M. Actis Grande, M. Rosso, The influence of sintering time on the properties of PM duplex stainless steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37/2 (2009) s. 387-396 Z. Brytan, M. Bonek, L.A. Dobrzaski, Laser surface remelting of wrought and sintered austenitic stainless steel, Proceedings of International Conference on Science and Education, Colombo, Sri Lanka, 2010, s. 62-64 Z. Brytan, M. Bonek, L.A. Dobrzaski, Laser surface remelting of sintered stainless steel, Proceedings of 13 th International Materials Symposium (IMSP 2010), 13-15.10.2010, Pamukkale University, Denizli, Turcja, s. 868-876 Z. Brytan, M. Bonek, L. A. Dobrzaski, D. Ugues, M. Actis Grande, The laser surface remelting of austenitic stainless steel, Materials Science Forum, Vols. 654-656 (2010) s. 2511-2514 Z. Brytan, M. Bonek, L.A. Dobrzaski, Microstructure and properties of laser surface alloyed PM austenitic stainless steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 40/1 (2010) s. 70-78 Z. Brytan, M. Bonek, L.A. Dobrzaski, W. Pakieła, Surface Layer Properties of Sintered Ferritic Stainless Steel Remelted and Alloyed with FeNi and Ni by HPDL Laser, Advanced Materials Research, Vol. 291-294 (2011) s. 1425-1428 Z. Brytan, L.A. Dobrzaski, W. Pakieła, Laser surface alloying of sintered stainless steels with SiC powder, Journal of Achievements in Materials and Manufacturing Engineering 47/1 (2011) 42-56 6) NN 507 287936, Politechnika lska, własny, kierownik projektu, data zakoczenia 29.12.2011 L.A. Dobrzaski, A. Grajcar, W. Borek, Processes forming the microstructure evolution of high-manganese austenitic steel in hotworking conditions, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37/2 (2009) s. 7-14 1

L.A. Dobrzaski, W. Borek, Hot-Working Behaviour of Advanced High-Manganese C-Mn-Si-Al Steels, Materials Science Forum, Vol. 654-656 (2010) s. 266-269 L.A. Dobrzaski, W. Borek, Microstructure forming processes of the 26Mn-3Si-3Al-Nb-Ti steel during hotworking conditions, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 40/1 (2010) s. 25-32 L.A. Dobrzaski, W. Borek, Hot-working of advanced high-manganese austenitic steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43/2 (2010) s. 507-526 L.A. Dobrzaski, W. Borek, Hot deformation and recrystallization of advanced high-manganese austenitic TWIP steels, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 46/1 (2011) s. 71-78 L.A. Dobrzaski, W. Borek: Hot-working of advanced high-manganese C-Mn-Si-Al steel, Proceeding of International Conference on Science and Education, Colombo, Sri Lanka (2010) s. 65-67 L.A. Dobrzaski, W. Borek, Influence of hot-working conditions on a structure of C-Mn-Si-Al TWIP steel, Mechanika i Informatyka, Materiały Ukraisko-Polskiej Konferencji Naukowej, 163-164. L.A. Dobrzaski, W. Borek, Hot-rolling of high-manganese Fe Mn (Al, Si) TWIP steels, Proceedings of 8 th International Conference on Industrial Tools and Material Processing Technologies ICIT&MPT 2011, 117-120. L.A. Dobrzaski, W. Borek, Influence of hot-working conditions on a structure of new-developed high-manganese C-Mn-Si-Al-Nb austenitic steels, (in print AMPT 2011). 7) NN 508 444136, Politechnika lska, własny, wykonawca, data zakoczenia 05.01.2012 L.A. Dobrzaski, M. Musztyfaga, A. Drygała, Selective laser sintering method of manufacturing front electrode of silicon solar cell, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42/1-2 (2010) s.111 119 L.A. Dobrzaski, A. Drygała, Multicrystalline silicon laser texturisation for photovoltaics, Procedings of 5 th International Ege Energy Symposium and Exhibition (IEESE-5), Denizli (2010) L.A. Dobrzaski, A. Drygała, Laserowe teksturowanie powierzchni krzemu polikrystalicznego, Elektronika konstrukcje, technologie, zastosowania, Nr 5 (2010), s. 57-59 L.A. Dobrzaski, M. Musztyfaga, A. Drygała, P. Panek, Investigation of the screen printed contacts of silicon solar cells using Transmission Line Model, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 41/1-2 (2010) s.57-65 L.A. Dobrzaski, A. Drygała, Wpływ obróbki laserowej na topografi powierzchni krzemu polikrystalicznego, Elektronika konstrukcje, technologie, zastosowania, Vol. 52, Nr 4 (2011) s. 53-54 L.A. Dobrzaski, A. Drygała, M. Giedro, Application of crystalline silikon solar cells in photovoltaic module, Archives of Materiale Science and Engineering, Vol. 44/1 (2010) s. 96-103 L.A. Dobrzaski, A. Drygała, Laserowe teksturowanie powierzchni krzemu polikrystalicznego, Materiały konferencyjne I Krajowej Konferencji Fotowoltaiki, Krynica-Zdrój 2009, Cd-rom L.A. Dobrzaski, A. Drygała, A.Januszka, Formation of photovoltaic modules based on polycrystalline solar cells, Journal of Achievements in Materials and Manufacturing Engineering, 37/2 (2009) 607-616 A. Drygała, L.A. Dobrzaski, Ogniwa fotowoltaiczne z laserowo teksturowan powierzchni, Budownictwo i Inynieria rodowiska Zeszyty Naukowe Politechniki Rzeszowskiej, Oficyna Wydawnicza Politechniki Rzeszowskiej, 57/4 (2010) str. 133-138 L.A. Dobrzaski, M. Musztyfaga, A. Drygała, Laser micro-processing of crystalline silicon for solar cells, Proceedings of 13th International Materials Symposium, Denizli 2010, pp. 857-867 M. Macek, A. Drygała, Ogólna charakterystyka krzemowych ogniw fotowoltaicznych, Prace Studenckich Kół Naukowych SOKÓŁ 2010, Gliwice, 2010, Zeszyt nr 26, str. 13-24 L.A. Dobrzaski, A. Drygała, Własnoci krzemowych ogniw fotowoltaicznych z laserowo teksturowan powierzchni, Materiały konferencyjne II Krajowej Konferencji Fotowoltaiki, Krynica-Zdrój 2011, str. 13-16 Cd-rom L.A. Dobrzaski, A. Drygała, M. Poprawa, Nadny system fotowoltaiczny sterowany komputerowo, Czasopismo Techniczne (Technical Transactions), 2011, str 57-64 L.A. Dobrzaski, A. Drygała, Influence of laser processing on polycrystalline silicon surface, Materials Science Forum (w druku) (Kanada-TERMEC, 2011) 8) N N507 471738, Politechnika lska, własny, wykonawca, data zakoczenia 28.03.2012 G. Matula, M. Bonek, L.A. Dobrzaski, Comparison of structure and Properties of hard coatings on commercial tool materials manufactured with the pressureless forming method or laser treatment, Materials Science Forum, Vols. 638-642 (2010) s. 1830-1835 M. Bonek, L.A. Dobrzaski, Characterization Performance of Laser Melted Commercial Tool Steels, Materials Science Forum, Vols. 654 656, (2010) s. 1848-1851 M. Bonek, G. Matula, L.A. Dobrzanski, Effect of laser surface melting on structure and properties of a high speed tool steel, The 2011 International Conference on Advanced Engineering Materials and Technology (AEMT 2011), Sanya, Chiny, 2011 (w druku) Bonek M., Matula G., Dobrzanski L.A.: Effect of laser surface melting on structure and properties of a high speed tool steel, Advanced Materials Research Vols. 291-294 (2011) pp 1365-1368 Bonek M., Matula G., Dobrzanski L.A.: Effect of laser surface melting on structure on commercial tool steel, VIII Ukrainsko-Polska Konferencja Młodych Naukowców Mechanika i Informatyka, Chmielnicki, Ukraina, 2011, s. 148-150 9) UDA-POIG.01.01.01-00.23/08-00, Politechnika lska, kierownik projektu, data zakoczenia 31.03.2012 L.A. Dobrzaski, T. Taski, J. Domagała, Sz. Malara, M. Król, Effect of high power diode laser surface melting and cooling rate on microstructure and properties of magnesium alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37/2 (2009) s. 238-257 2

L.A. Dobrzaski, Sz. Malara, T. Taski, Laser surface treatment of magnesium alloys with aluminium oxide powder, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 37/1 (2009) s. 70-77 L.A. Dobrzaski, Sz. Malara, T. Taski, J. Konieczny, Effect of high power diode laser surface alloying on structure MCMgAl12Zn1alloy, Archives of Materials Science and Engineering, Vol. 43/1 (2010) s. 54-61 L.A. Dobrzaski, L. ukowska, Gradient PVD coatings deposited on the sintered tool materials, Archives of Materials Science and Engineering 48/2 (2011) s. 103-111 L.A. Dobrzaski, M. Staszuk, PVD and CVD gradient coatings on sintered carbides and sialon tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43/2 (2010) s. 552-576 L.A. Dobrzaski, B. Dołaska, Structure and properties of sintered tool gradient materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43/2 (2010) s. 711-733 L.A. Dobrzaski, E. Jonda, K. Labisz, M. Bonek, A. Klimpel, The comparision of tribological properties of the surface layer of the hot work tool steels obtained by laser alloying, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42/1-2 (2010) s. 142-147 L.A. Dobrzaski, Kształtowanie struktury i własnoci materiałów inynierskich i biomedycznych, Wyd. International OCSCO World Press, Gliwice 2009 L.A. Dobrzaski, Załoenia społeczne i badawcze projektu FORSURF nt. Foresight wiodcych technologii kształtowania własnoci powierzchni materiałów inynierskich i biomateriałów, w 2nd Workshop on foresight of surface properties formation leading technologies of engineering materials and biomaterials, Wyd. International OCSCO World Press, Gliwice 2009 Materiały konferencyjne: Praca zbiorowa, red. L.A. Dobrzaski, 1st Workshop on foresight of surface properties formation leading technologies of engineering materials and biomaterials, Wyd. International OCSCO World Press, Gliwice 2009 Materiały konferencyjne: Praca zbiorowa, red.: L.A. Dobrzaski: 2nd Workshop on foresight of surface properties formation leading technologies of engineering materials and biomaterials, Wyd. International OCSCO World Press, Gliwice 2009 Praca zbiorowa, red. L.A. Dobrzaski, A. Dobrzaska-Danikiewicz: 3rd Workshop on foresight of surface properties formation leading technologies of engineering materials and biomaterials, Raport z realizacji zadania 2. Analiza istniejcej sytuacji w zakresie rozwoju technologii oraz uwarunkowa społeczno-gospodarczych w odniesieniu do przedmiotu foresightu pt. FORSURF foresight wiodcych technologii kształtowania własnoci powierzchni materiałów inynierskich i biomedycznych, Wyd. International OCSCO World Press, Gliwice 2009 10) NN 507 468837, Politechnika lska, własny, wykonawca, data zakoczenia 30.09.2012 T. Taski, L.A. Dobrzaski, R. Maniara, Microstructures of Mg-Al-Zn and Al Si Cu cast alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 38/1 (2010) s. 64-71 T. Taski, L. A. Dobrzaski, K. Labisz, Corrosion behaviour of die-casting magnesium alloys, Proceedings of the 6th International Conference Mechatronics Systems and Materials T. Taski, L. A. Dobrzaski, K. Labisz, Investigation of the microstructure characteristic of chosen magnesium alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42/1-2 (2010) s. 94-101 L.A. Dobrzaski, M. Król, T. Taski, Application a neural networks in crystallization process of Mg-Al-Zn alloys, Archives of Computational Materials Science and Surface Engineering, Vol. 2/3 (2010) s. 149-156 L. A. Dobrzaski, M. Król, T. Taski, Influence of cooling rate on crystallization, structure and mechanical properties of MCMgAl6Zn1 alloy, Archives of Foundry Engineering, Vol. 10/3 (2010) s. 105-110 L. A. Dobrzaski, T. Taski, Sz. Malara, M. Król, Structure and properties investigation of an magnesium alloys processed by heat treatment and laser surface treatment, Materials Science Forum Vol. 674 (2011) pp 11-18 L. A. Dobrzaski, T. Taski, Sz. Malara, M. Król, J. Domagała-Dubiel, Contemporary forming methods of the structure and properties of cast magnesium alloys, Magnesium Alloys - Design, Processing and Properties, edited by: Frank Czerwinski, ISBN: 978-953-307-520-4, Publisher: InTech, January 2011, s. 321-350 T. Taski, K. Labisz, L. A. Dobrzaski, Effect of Al additions and heat treatment on corrosion properties of Mg Al based alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 44/1 (2011) s. 64-72 11) NN 507 438539, Politechnika lska, własny, kierownik projektu, data zakoczenia 25.02.2013 L.A. Dobrzaski, Ł. Reimann, Corrosion resistance of base metals alloys used on dentures, ICIT&MPT 2011 Conference, Slovenia (w druku) Ł. Reimann, L.A. Dobrzaski, Mikrostruktura i twardo stopów na osnowie kobaltu wykorzystywanych w inynierii stomatologicznej, XXXIX Szkoła Inynierii Materiałowej, Kraków Krynica 27-30.09.2011 (w druku) 12) UDA-POKL.04.01.01-00-003/09-00, Politechnika lska, kierownik projektu, data zakoczenia 31.03.2014 L.A. Dobrzaski, M. Król, T. Taski, Effect of cooling rate and aluminum contents on the Mg-Al-Zn alloys structure and mechanical properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43/2 (2010) s. 613-633 L.A. Dobrzaski, R. Honysz, The idea of material science virtual laboratory, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42/1-2 (2010) s. 196-203 L.A. Dobrzaski, R. Honysz, Artificial intelligence and virtual environment application for materials design methodology, Archives of Materials Science and Engineering, Vol. 45/2 (2010) s. 69-94 L.A. Dobrzaski, M. Pawlyta, A. Krzto, B. Liszka, K. Labisz, Synthesis and characterization of carbon nanotubes decorated with platinum nanoparticles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 39/2 (2010) s. 184-189 13) NN 507 436939, Politechnika lska, promotorski, kierownik projektu, zakoczony 3

L.A. Dobrzaski, M. Musztyfaga, A. Drygała, Selective laser sintering method of manufacturing front electrode of silicon solar cell, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42/1-2 (2010) s.111-119 L.A. Dobrzaski, M. Musztyfaga, A. Drygała, P. Panek, Wytwarzanie elektrody przedniej ogniwa fotowoltaicznego z wykorzystaniem metody selektywnego spiekania laserowego, II Krajowa Konferencja Fotowoltaiki, Krynica-Zdrój 2011, CD-rom, 51-59 L.A. Dobrzaski, M. Musztyfaga, A. Drygała, P. Panek, Porównanie i własnoci elektrycznych przednich elektrod ogniw słonecznych wypalanych w piecu tamowym i selektywnie spiekanych laserowo, elektryczne i optyczne fotoogniw wytwarzanych z wykorzystaniem metody sitodruku, Elektronika - konstrukcje, technologie, zastosowania, Nr 4 (2011) 50-52 L.A. Dobrzaski, M. Musztyfaga, A. Drygała, W. Kwany, P. Panek, Structure and electrical properties of screen printed contacts on silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering, JAMME, Vol. 45/2 (2011) s. 141-147 14) NN 519 384136, Politechnika lska, własny, wykonawca, zakoczony A. liwa, J. Mikuła, L.A. Dobrzaski, FEM application for modeling of PVD coatings properties, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 41/1-2 (2010) s. 164-171 A. liwa, W. Kwany, L.A. Dobrzaski, Computer simulation on stresses in coatings obtained in the PVD process, Inynieria Materiałowa, Vol. 3/175 (2010) s. 732-734 L.A. Dobrzaski, A. liwa, L. ukowska, J. Mikuła, K. Gołombek, Structure and mechanical properties of PVD coatings for tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 42/1-2 (2010) s. 33-41 L. A. Dobrzaski, M. Staszuk, K. Gołombek, A. liwa, M. Pancielejko, Structure and properties PVD and CVD coatings deposited onto edges of sintered cutting tools, Archives of Metallurgy and Materials, Vol. 55/1 (2010) s.187-193 A. liwa, L.A. Dobrzaski, Komputerowa symulacja napre własnych powłok uzyskanych w procesie PVD, VI Polsko-Ukraiska Konferencja Naukowo Techniczna Mechanika i Informatyka, Chmielnicki, Ukraina, 2011, s.201-202 Maka B., liwa A., Przykłady zastosowania MES do analizy wybranych zagadnie w inynierii materiałowej, Prace studenckich kół naukowych SOKÓŁ 2010 26 2010 37-44 liwa A., ukowska L.W., Mikuła J., Gołombek K., Properties of (Ti,Al)N, Ti(C,N) and (Ti,Al,Si)N coatings for tool materials, Dobrzaski L.A., Proceedings of International Conference on Science and Education Turcja 2010 1182-1190 liwa A., Dobrzaski L.A., Kwany W., Staszuk M., Simulation of the microhardness and internal stresses measurement of PVD coatings by use of FEM, Journal of Achievements in Materials and Manufacturing Engineering 43 (2) 2010 684-691 Dobrzaski L.A., Staszuk M., Gołombek K., liwa A., Pancielejko M., Structure and properties PVD and CVD coatings deposited onto edges of sintered cutting tools, Archives of Metallurgy and Materials 55 (1) 2010 187-193 15) N507 2068 33, Politechnika lska, własny, główny wykonawca, zakoczony A. liwa, J. Mikuła, K. Gołombek, L.A Dobrzaski, FEM modeling of internal stress in PVD coated FGM, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 36/1 (2009) s. 71-78 L.A. Dobrzaski, L.W. ukowska, J. Mikuła, K. Gołombek, T. Gawarecki, Hard gradient (Ti,Al,Si)N coating deposited on composite tool materials, Archives of Materials Science and Engineering, Vol. 36/2 (2009) s.69-75 L.A. Dobrzaski, L.W. ukowska, J. Mikuła, K. Gołombek, P. Podstawski, Functional properties of the sintered tool materials with (Ti,Al)N coating, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 36/2 (2009) s. 134-141 K. Gołombek, J. Mikuła, D. Pakuła, L. ukowska, L.A. Dobrzaski, Sintered tool materials with multicomponent PVD gradient coatings, Journal of Achievements in Materials and Manufacturing Engineering, 31/1 (2008) s. 15-22 K. Lukaszkowicz, J. Mikuła, K. Gołombek, L.A. Dobrzaski, J. Szewczenko, M. Pancielejko, Structure and mechanical properties of nanocomposite coatings deposited by PVD process onto tool steel substrates, Journal of Materials Engineering, Vol. 6 (2008) s. 732-737 L.A. Dobrzaski, M. Staszuk, K. Gołombek, J. Mikuła, Struktura i własnoci powłok PVD naniesionych na sialonow ceramik narzdziow, Inynieria Materiałowa, Nr 6 (2008), s. 728-731 A liwa, L.A Dobrzaski, W. Kwany, W Sitek, Finite Element Method application for modeling of PVD coatings properties, Journal of Achievements in Materials and Manufacturing Engineering 27(2) 2008, pp. 171-174 J. Mikuła G. Matula, K. Gołombek, L.A. Dobrzaski, Sintered composite gradient tool materials, Archives of Materials Science and Engineering, 32(1) 2008 25-28 L.A. Dobrzaski, L.W. ukowska, J. Kubacki, K. Gołombek, J. Mikuła, XPS and AES analysis of PVD coatings, Archives of Materials Science and Engineering 32(2) 2008 99-102 G. Matula, K. Golombek, J. Mikula, L.A. Dobrzanski, Structure of sintered gradient tool materials, Journal of Achievements in Materials and Manufacturing Engineering, 32(1) 2009, 23-28 D. Pakuła, A. Križ, M. Staszuk, L.A. Dobrzaski, Structure and properties of PVD coatings deposited on the nitride ceramic base, Proceedings of the Conference On Coatings and Layers 2009 16) N507 084 32/2398, Politechnika lska, własny, główny wykonawca, zakoczony L.A. Dobrzaski, B. Dołaska, G. Matula, Influence of carbide (W, Ti)C on the structure and properties of tool gradient materials, Archives of Materials Science and Engineering, Vol. 28/10 (2007) s. 617-620 G. Matula, L.A. Dobrzaski, A. Várez, B. Levenfeld, Development of a feedstock formulation based on PP for MIM of carbides reinforced M2, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 27/2 (2008) s. 195-198 L.A. Dobrzaski, B. Dołaska, G. Matula, Structure and properties of Tool Gradient Materials reinforcer with the WC carbides, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28/1 (2008), s. 35-38 L.A. Dobrzaski, A. Kloc-Ptaszna, G. Matula, Properties of Sintered Gradient Tool WC/HS6-5-2 Materials, Proceedings of II International Conference on Modern Achievements of Science and Education, 2008 4

G. Matula, M. Bonek, L.A. Dobrzaski, Comparison of Structure and Properties of Hard Coatings on Commercial Tool Materials Manufactured with the Pressureless Forming Method or Laser Treatment, Materials Science Forum, Vols. 638-642 (2010) s. 1830-1835 G. Matula, L.A. Dobrzaski, G. Herranz, A. Várez, B. Levenfeld, J.M. Torralba, Structure and properties of HS6-5-2 type HSS manufactured by different P/M methods, Journal of Achievements in Materials and Manufacturing Engineering vol. 24 pp 71-74, 2007 G. Matula Influence of binder composition on structure and properties of carbide alloyed composite manufactured with the PIM method,12 th International Materials Symposium, Pamukkale-Denizli, Turkey, pp.601-605, 2008 G. Matula, L.A. Dobrzaski, Employment of the pressureless forming for fabrication of abrasion resistant coatings on tool materials, International Conference Advances in Materials and Processing Technologies, AMPT'2008 (abstract) G. Matula, Influence of binder composition on structure and properties of carbide alloyed composite manufactured with the pim method, Journal of Achievements in Materials and Manufacturing Engineering vol. 30(2) pp.193-196, 2008 G. Matula, Study on steel matrix composites with (Ti,Al)N gradient PVD coatings, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 34, Issue 1, pp. 79-86, 2009 G. Matula, Manufacturing of hard coatings on commercial tool materials using a pressureless forming method17 th International Conference on High Performance P/M Materials Proceedings vol.2 pp. HM79/1-10, 2009 A. liwa, G. Matula, L.A. Dobrzaski, Finite Element Method Application for Distribution Determining of Feedstock During Powder Injection Moulding, Archives of Materials Science and Engineering, JAMME, vol. 37/2 December 2009, pp. 584-591 17) R15 007 02, Politechnika lska, rozwojowy, kierownik projektu, zakoczony L.A. Dobrzaski, T. Taski, L. ížek, Microstructure of MCMgAl12Zn1 magnesium alloy, Archives of Foundry Engineering, Vol. 7/1 (2007) s. 179-182 L.A. Dobrzaski, T. Taski, L. ížek, Characteristics of MCMgAl9Zn1 MCMgAl6Zn1 magnesium alloys structure, Journal of Materials Engineering, Vols. 157-158 (2007) s. 381-386 L.A. Dobrzaski, T. Taski, J. Domagała: Microstructure analysis of MCMgAl16Zn1 MCMgAl4Zn1 magnesium cast alloy, Archives of Foundry Engineering, Vol.7/4 (2007) s. 33-38 L. A. Dobrzaski, A. liwa, T. Taski, Numerical simulation model for the determination of hardness for casting the magnesium alloys MCMgAl6Zn1, Archives of Materials Science, Vol. 29/3 (2008) s. 118-124 L.A. Dobrzaski, T. Taski, J. Trzaska, L. ížek, Modelling of hardness prediction of magnesium alloys using artificial neural networks applications, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 26 (2008) s. 9-12 L.A. Dobrzaski, T. Taski, L. ížek, J. Domagała, Mechanical properties and wear resistance of magnesium casting alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31/1 (2008) s. 83-90 L.A. Dobrzaski, J. Domagała, T. Taski, A. Klimpel, D. Janicki, Laser surface treatment of magnesium alloy with WC powder, Archives of Materials Science and Engineering, Vol. 30/2 (2008) s. 113-116 L.A. Dobrzaski, J. Domagała, T. Taski, A. Klimpel, D. Janicki, Laser surface treatment of magnesium alloy with WC and TiC powders using HPDL, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 28/2 (2008) s. 179-186 L.A. Dobrzaski, J. Domagała, T. Taski, A. Klimpel, D. Janicki, Modyfikacja warstwy wierzchniej odlewniczych stopów magnezu przy uyciu lasera diodowego duej mocy (HPDL), Inynieria Materiałowa, Nr 6 (2008) s.580-584 L.A. Dobrzaski, J. Domagała, T. Taski, A. Klimpel, D. Janicki, Characteristic of Mg-Al-Zn alloys after laser treatment, Archives of Materials Science and Engineering, Vol. 34/2 (2008) s. 69-74 L.A. Dobrzaski, T. Taski, J. Domagała, M. Król, Sz. Malara, A. Klimpel, Structure and properties of the Mg alloys in as-cast state and after heat and laser treatment, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31/2 (2008) s. 123-147 L. A. Dobrzaski, M. Król, T. Taski, R. Maniara, Effect of cooling rate on the solidification behaviour of MC MgAl6Zn1 alloy, Archives of Materials Science and Engineering,Vol. 29/3 (2008) s. 110-117 L.A. Dobrzaski, T. Taski, J. Domagała, M. Bonek, A. Klimpel, Microstructure analysis of the modified casting magnesium alloys after heat and laser treatment, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 32/1 (2009) s. 7-12 L.A. Dobrzaski, T. Taski, Influence of aluminium content on behaviour of magnesium cast alloys in bentonite sand mould, Solid State Phenomena, Vols. 147-149 (2009) s. 764-769 L. A. Dobrzaski, Sz. Malara, T. Taski, A. Klimpel, D. Janicki, Laser surface treatment of magnesium alloys with silicon carbide powder, Archives of Materials Science and Engineering, Vol. 35/1 (2009) s. 54-60 L.A. Dobrzaski, T. Taski, L. ížek, J. Madejski, Selection of heat treatment condition of the Mg-Al-Zn alloys, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 32/2 (2009) s. 203-210 L.A. Dobrzaski, S. Malara, J. Domagała, T. Taski, K. Gołombek, Influence of the laser modification of surface on properties and structure of magnesium alloys, Archives of Materials Science and Engineering, Vol. 35/2 (2009) s. 95-100 L.A. Dobrzaski, J. Domagała, T. Taski. A. Klimpel, D. Janicki, Laser surface treatment of cast magnesium alloys, Archives of Materials Science and Engineering, Vol. 35/2 (2009) s. 101-106 A. liwa, L.A. Dobrzaski, T. Taski, Finite element method application for modelling of mechanical properties, Computational Materials Science and Surface Engineering, Vol. 1/1 (2009) s. 25-28 18) PBZ-KBN-100/T08/2003, Politechnika lska, zamawiany, kierownik projektu, zakoczony L.A. Dobrzaski, A. Kloc-Ptaszna, G. Matula, J.M. Torralba, Structure and properties of the gradient tool materials of unalloyed steel matrix reinforced with HS6-5-2 high-speed steel, Archives of Materials Science and Engineering, Vol. 28/4 (2007) s. 197-202 L.A. Dobrzaski, A. Kloc-Ptaszna, G. Matula, J.M. Torralba, Structure of the gradient carbide steels of HS 6-5-2 high-speed steel matrix, Archives of Materials Science and Engineering, Vol. 28/10 (2007) s. 582-592 5

L.A. Dobrzaski, A. Kloc-Ptaszna, G. Matula, Gradient tool WC/HS6-5-2 materials produced using the powder metallurgy method, Archives of Materials Science and Engineering, Vol. 31/1 (2008) s. 9-12 L.A. Dobrzaski, K. Gołombek, J. Mikuła, D. Pakuła, Multilayer and gradient PVD coatings on the sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 31/2 (2008) s. 170-190 L.A. Dobrzaski, S. Skrzypek, D. Pakuła, J. Mikuła, A. Kiž, Influence of the PVD and CVD technologies on the residual macrostresses and functional properties of the coated tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 35/2 (2009) s. 162-168 19) KBN Nr3 T08A 041 30, Politechnika lska, promotorski, kierownik projektu, zakoczony L.A. Dobrzaski, M. Kremzer, A. Nagel, Influence of reinforcements shape on the structure and properties of Al-Al2O3 composite materials, Materials Science Forum, Vols. 591-593 (2008) s. 188-192 L.A. Dobrzaski, M. Kremzer, A.J. Nowak, A. Nagel, Aluminium matrix composites fabricated by infiltration method, Archives of Material Science and Engineering, Vol. 36/1 (2009) s. 5-11 L.A. Dobrzaski, M. Kremzer, A. Nagel, Structure and properties of ceramic preforms based on Al2O3 particles, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 35/1 (2009) s. 7-13 L.A. Dobrzaski, M. Kremzer, A.J. Nowak, A. Nagel, Composite materials based on porous ceramic performs infiltrated by aluminium alloy, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20 (2007) s. 95-98 20) KBN Nr3 T08C 04829, Politechnika lska, promotorski, kierownik projektu, zakoczony L.A. Dobrzaski, A. Drygała, K. Gołombek, P. Panek, E. Bielaska, P. Ziba, Laser surface treatment of multicrystalline silicon for enhancing optical properties, Journal of Materials Processing Technology, Vol. 201/1-3 (2008) s. 291-296 L.A. Dobrzaski, A. Drygała, Laser processing of multicrystalline silicon for texturizaton of solar cells, Journal of Materials Processing Technology, Vol. 191/1-3 (2007) s. 228-231 L. A. Dobrzaski, A. Drygała, P. Panek, M. Lipiski, P. Ziba, Application of laser in silicon surface processing, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 24/2 (2007) s. 179-182 L.A. Dobrzaski, A. Drygała, Processing of silicon surface by Nd:YAG laser, Journal of Achievements in Materials and Manufacturing Engineering JAMME, Gliwice Wisła, Poland, Vol. 17 (2006) s. 321-324 L.A. Dobrzaski, A. Drygała, Modyfikacja powierzchni krzemowych ogniw słonecznych, Materiały konferencyjne Polsko-Ukraiskiej Konferencji Naukowej, Ukraina (2006) s. 205-207 L.A. Dobrzaski, A. Drygała, J. Konieczny, J. Leltko, Structure of laser treated multicrystalline silicon wafers, Worldwide Journal of Achievements in Materials and Manufacturing Engineering JAMME, Gliwice-Zakopane, vol.21 Issue 2 (2006) pp.69 72 L.A. Dobrzaski, L. Wosiska, B. Dołaska, A. Drygała, Comparison of electrical characteristics of silicon solar cells, Worldwide Journal of Achievements in Materials and Manufacturing Engineering JAMME, Gliwice Wisła, Poland, vol. 18, Issue 1-2 (2006) pp. 215-218 L.A. Dobrzaski, A. Drygała, Laser processing of multicrystalline silicon for texturizaton of solar cells, International Conference on Advanced Materials and Processing Technologies, AMPT 2006, Las Vegas, USA, 2006, CD-rom L.A. Dobrzaski, A. Drygała, Wpływ obróbki laserowej na struktur krzemu multikrystalicznego, XXXIV Szkoła Inynierii Materiałowej, Krynica, 2006, str. 467-470 21) KBN Nr 3 T08A 07829, Politechnika lska, promotorski, kierownik projektu, zakoczony L.A. Dobrzaski, Z. Brytan, M. Actis Grande, M. Rosso, E. J. Pallavicini, Properties of vacuum sintered Duplex Stainless Steels, Journal of Materials Processing Technology, Vols.162-163 (2005) s. 86-292 L.A. Dobrzaski, Z. Brytan, M. Actis Grande, M. Rosso, Stale ferrytyczno-austenityczne wytwarzane technologi metalurgii proszków, Ochrona Przed Korozj, nr 6 (2005) s. 220 L.A. Dobrzaski, Z. Brytan, M. Actis Grande, M. Rosso, Corrosion resistance of sintered duplex stainless steel evaluated by electrochemical method, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17/1-2 (2006) s. 317-320 L.A. Dobrzaski, Z. Brytan, M. Actis Grande, M. Rosso, Struktura i własnoci spiekanych stali typu duplex, Inynieria Materiałowa, Nr 3/151 (2006) s. 580 L.A. Dobrzaski, Z. Brytan, M. Actis Grande, M. Rosso, Influence of sintering parameters on the properties of duplex stainless steel, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20/1-2 (2006) s. 231-234 L.A. Dobrzaski, Z. Brytan, M. Actis Grande, M. Rosso, Corrosion resistance of sintered Duplex Stainless Steels in the Salt Fog Spray Test, Journal of Materials Processing Technology, Vols. 192-193 (2007) s. 443-448 L.A. Dobrzaski, Z. Brytan, M. Actis Grande, M. Rosso, Properties of vacuum sintered duplex stainless steels, Materials Science Forum, Vols. 534-536 (2007) s. 721-724 22) KBN Nr 3 T08A 022 27, Politechnika lska, promotorski, kierownik projektu, zakoczony L.A. Dobrzaski, M. Krupiski, J.H. Sokolowski, Computer aided classification of flaws occurred during casting of aluminum, Journal of Materials Processing Technology, Vol. 167/2-3 (2005) s. 456-462 M. Krupiski, L.A. Dobrzaski, J.H. Sokolowski, W. Kasprzak, G. Byczynski, Methodology for automatic control of automotive Al-Si cast components, Materials Science Forum, Vols. 539-543 (2007) s. 339-344 L.A. Dobrzaski, M. Krupiski, J.H. Sokołowski, P. Zarychta, The use of neural networks for the classification of casting defect, International Journal of Computational Materials Science and Surface Engineering, Vol. 1/1 (2007) s. 18-27 M. Krupiski, L.A. Dobrzaski, J.H. Sokołowski, Microstructure analysis of the automotive Al-Si-Cu castings, Archives of Foundry Engineering, Vol. 8/1 (2008) s. 71-74 6

23) KNB Nr 3 T08C 049 26 Politechnika lska, promotorski, kierownik projektu, zakoczony L.A. Dobrzaski, M. Drak, Properties of composite materials with polymer matrix reinforced with Nd Fe B hard magnetic particles, Journal of Materials Processing Technology, Vol. 175/1-3 (2006) s. 149-156 L.A. Dobrzaski, M. Drak, Structure and properties of composite materials with polymer reinforced Nd-Fe-B hard magnetic materials, Journal of Materials Processing Technology, Vol. 157-158 (2004) s. 650-657 L.A. Dobrzaski, M. Drak, J. Trzaska, Employment of neural networks for modeling of corrosion wear of hard magnetic composite materials, Inynieria Materiałowa nr 3 (2004) s.709-712 L.A. Dobrzaski, M. Drak, Structure and properties of polymer matrix hard magnetic composite materials Nd-Fe-B, The 3rd International Conference on Materials Processing for Properties and Performance MP3, Singapur (2004) s. 896-906 L.A. Dobrzaski, M. Drak, Odporno korozyjna materiałów kompozytowych magnetycznie twardych Nd-Fe-B pokrytych powłokami ochronnymi, Ochrona przed korozj nr 6 (2005) s. 226-231 Drak M., Dobrzaski L.A.: Korozja materiałów kompozytowych magnetycznie twardych Nd-Fe-B o osnowie polimerowej, XXXII Szkoła Inynierii Materiałowej Kraków-Krynica (2004) 521-527 Dobrzaski L.A., Drak M.: Properties of composite materials with polimer matrix reinforced with Nd-Fe-B hard magnetic particles, Journal of Materials Processing and Technology 175(1-3) (2004 6) pp.149-156 Dobrzaski L.A., Drak M.: Odporno korozyjna materiałów kompozytowych magnetycznie twardych Nd-Fe-B pokrytych powłokami ochronnymi, Ochrona przed korozj 48/6(2005) 226-231 7