X-tendolight TPS498 TL-D designed for your applications

Transkrypt

1 X-tendolight TPS498 TL-D designed for your applications X-tendolight TPS498 TL-D X-tendolight TPS498 TL-D is a high-performance suspended luminaire for 1 or 2 TL-D fluorescent lamps with a wide range of high-performance optics. Direct and direct/indirect versions are available. The luminaires can be mounted individually or in configurations. They also come with a choice of ballast types and lamps, and extra features can be added, such as emergency lighting, lighting controls, etc. Korzyści High-performance suspended luminaire for 1 or 2 fluorescent lamps with a wide range of optics for top-quality lighting performance Available in direct and indirect lighting versions Can be mounted individually or in configurations

2 X-tendolight TPS498 TL-D 2 Cechy Suitable for suspended mounting for direct/indirect lighting 3D OLC lamellae, with excellent glare control, provides freedom in interior design The concave shapes of the lamellae provides excellent lighttechnical performance i.e. high efficiency and good uniformity. Housing made of 0.6 mm epoxy polyester powder coated extruded aluminium sheet Choice of optics in - D6 : High - gloss optic for all round glare and beam control.this makes this optic specially suited to areas with intensive monitor use. The high efficiency of this optic is realised via the side and end reflector's optimised geometry, and the registered, uniquely designed 3D cross lamellae, with a Fresnel structure on the lamellae saddle and a concaved Iowercontour.The high gloss OLC optic betters the glare recommendations of both the German DI N 5035/7 BAP 60, and the British (Ex-CIBSE Lighting Guide 3, Cat 2). Wniosek Representative offices Reception and public service areas General offices, schools Recreational areas (restaurants, cafeterias) Corridors and staircases Department stores, boutiques

3 X-tendolight TPS498 TL-D 3 Specyfikacje Type TPS498 (direct and direct/indirect) Light source Fluorescent: - 1 x or 2* x MASTER TL-D / G13 / 36, 58 W - *two lamps in one-lamp housing Lamp included No Yes (light color 451 (ActiViva Natural), 452 (ActiViva Active), 827, 830 or 840) Gear Electro magnetic (low loss), 230 or 240 V / 50 Hz: - Parallel compensated (IC) Electronic, V / Hz: - High Frequency Performer, Intelligent (HFP-I) - High Frequency Performer (HFP) - High Frequency Regulator, DALI (HFD) - High Frequency Regulator (HFR) Light distribution Direct lighting (D) Direct/Indirect lighting (D/I) Optic High-gloss optic, high-reflective, with top reflector (T C6-H) High-gloss optic, high-reflective (C6- H) High-gloss optic, double parabolic 50 (C6) Semi-high-gloss optic, high-reflective, with top reflector (T D6-H) Semi-high-gloss optic, high-reflective (D6-H) Semi-high-gloss optic, double parabolic (D6) Matt optic, high-reflectance with top reflector (T M6-H) Matt optic, high-reflectance (M6-H) Matt optic, double parabolic louvers, closed (M6) Matt optic, double parabolic louvers, asymmetric (M6-A) Matt optic, double parabolic, bi-directional 30 (M6-BD30) Matt optic, double parabolic, bi-directional 45 (M6-BD45) Matt mirror, ribbed cross louvers (M2) Matt mirror, ribbed louver, wide beam (M2-WB) Matt mirror, ribbed louver, asymmetric (M2-A) Matt mirror, ribbed louver, bi-directional 30 (M2-BD30) Matt mirror, ribbed louver, bi-directional 45 (M2-BD45) Lamellae louver, flat cross louvers (L1) Mirror with decorative green louvers (M-DGN) Asymmetrical mirror (A) Optical cover Connection Housing configuration (for line configurations) Decorative opal cover (OD) Push-in connector, outside lamp compartment Line feature phase 1 (LF), for insertion in a line Option Closed housing (DC) Emergency lighting: - 3 hours (EL3), 14 W lampholder (E14) Lighting controls: - Luxsense daylight controller (LX), ActiLume multi controller (ACL) Euro fuse (FU) included Protection foil (FL) to protect the luminaire during installation

4 X-tendolight TPS498 TL-D 4 Material Installation Counterweight (CW) to balance the luminaire Housing: powder painted steel, white or silver (SI) Corner pieces: ABS, white or silver Individual; in line or in a configuration, suspended mounting with various suspension sets or tubing Fast fine adjustment with clutch device (Reutlinger) or screw device Remarks Main applications Dedicated line and configuration arrangement luminaires (LE and LF types) include all connection and suspension parts and through-wiring (1 and 3 phase versions) Office, retail, recreational, public buildings Accessory Suspension sets, coupling piece, swivel device, end caps, counter weight Produkty powiązane X-tendolight TPS498 suspended luminaire with OLC high-gloss high-quality aluminum optic with 3D lamellae (C6) or high-reflectance 3D lamellae (C6-H) and end caps (set of 2); needed with line feature luminaires (LF) only X-tendolight TPS498 suspended luminaire with OLC matt high-quality aluminum optic with 3D lamellae (M6) or highreflectance 3D lamellae (M6-H) and end caps (set of 2); needed with line feature luminaires (LF) only Rysunki techniczne TPS498 Product A (Min) A (Norm) A (Max) B (Min) B (Norm) B (Max) TPS498 2xTL-D58W/840 HFP D/I C6 FU TPS498 1xTL-D36W/830 IC M6 FL

5 X-tendolight TPS498 TL-D 5 Akcesoria ZPH301 US SI X-tendolight TCS398 luminaire with universal suspension set

6 X-tendolight TPS498 TL-D 6 Dane fotometryczne TPS498 WH 1xTL-D36W M6 TPS498 H1L D/I WH 2xTL-D58W HFP C6 TPS498 H1L D/I WH 2xTL-D58W HFP C6 TPS498 WH 1xTL-D36W M6 Porównaj tabeli Kod zamówienia Rodzina produktów Ilość źródeł światła Optyka Kod rodziny źródła światła Moc lampy Barwa światła lampy Kolor Oświetlenie awaryjne Napięcie Kod IP Osprzęt TPS498 2 C6 TL-D WH No IP20 HFP TPS498 1 M6 TL-D WH No 230 IP20 CONV ZPH SI Porównaj tabeli Kod zamówienia Rodzina produktów Układ kompensacyjny Kombi Klasa ochrony Element systemu sterowania Górny odbłyśnik Znak bezpieczeństwa Test 850 C Klosz Wspólczynnik IK Oznaczenie CE ENEC TPS498 No K CLI No No F No No IK07 CE ENEC TPS498 IC K CLI No No F No No IK07 CE ENEC ZPH

7 X-tendolight TPS498 TL-D Koninklijke Philips Electronics N.V. Wszelkie prawa zastrzeżone Dane mogą ulec zmianie bez uprzedniego powiadomienia. Znak towarowy jest własnością Koninklijke Philips Electronics N.V. lub odpowiednich podmiotów.