Raport wygenerowany z Bazy Publikacji Pracowników Politechniki Lubelskiej (01-12-2017 20:54:16) Publikacje w latach 2011-2014 dla autora: Prof. dr hab. Barbara Surowska Katedra Inżynierii Materiałowej Publikacje Współpraca z zagranicą Impact Factor Lista filadelfijska Lista MNiSW Cytowania 61 2 7 7 27 23 Artykuły (28) Analiza porównawcza kompozytów polimerowych wzmacnianych włóknami zawierających mikropory / Bieniaś Jarosław, Surowska Barbara, Ostapiuk Monika // INŻYNIERIA MATERIAŁOWA - 2012, nr 6, s. 655-658 [MNiSW: 7] Analiza wpływu nieciągłości w odniesieniu do poziomu tłumienia w kompozytach polimerowych wzmacnianych włóknem szklanym / Bieniaś Jarosław, Ostapiuk Monika, Surowska Barbara, Beer-Lech Karolina // KOMPOZYTY - 2011, nr 1, vol. 0, s. 70-74 [MNiSW: 7] Analysis of load-displacement curves and energy absorption relations of selected fibre metal laminates subjected to low-velocity impact / Jakubczak Patryk, Bieniaś Jarosław, Surowska Barbara // COMPOSITES THEORY AND PRACTICE - 2014, nr 3, s. 123-126 [MNiSW: 8] Analysis of microstructure damage in carbon/epoxy composites using FEM / Bieniaś Jarosław, Dębski Hubert, Surowska Barbara, Sadowski Tomasz // COMPUTATIONAL MATERIALS SCIENCE - 2012, vol. 64, s. 168-172 [MNiSW: 30] Charakterystyka mikrostrukturalna wybranych laminatów metalowo-włóknistych / Ostapiuk Monika, Surowska Barbara // PRZETWORSTWO TWORZYW - 2012, nr 3, s. 262-265 [MNiSW: 4] Comparison of polymer composites behavior to low-velocity impact and quasi-static indentation / Bieniaś Jarosław, Jakubczak Patryk, Surowska Barbara // COMPOSITES THEORY AND PRACTICE - 2013, nr 3, s. 155-159 [MNiSW: 8] Experimental investigation on the influence of fibers orientation on the failure of carbon hybrid laminates / Majerski Krzysztof, Surowska Barbara, Bieniaś Jarosław, Jakubczak Patryk, Ostapiuk Monika // AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY - 2014, nr 4, vol. 86, s. 307-311 [MNiSW: 15] Fractography and damage analysis of carbon/epoxy composites under static and dynamic loads at elevated temperatures / Bieniaś Jarosław, Ostapiuk Monika, Surowska Barbara // ACTA MECHANICA ET AUTOMATICA - 2012, nr 1, vol. 6, s. 17-20 [MNiSW: 5] Identyfikacja nieciągłości w kompozytowych panelach sandwiczowych z wykorzystaniem mikrotomografii komputerowej / Ostapiuk Monika, Bieniaś Jarosław, Jakubczak Patryk, Surowska Barbara // PRZETWORSTWO TWORZYW - 2012, nr 2, s. 93-97 [MNiSW: 4] The impact behavior of aluminum hybrid laminates / Jakubczak Patryk, Bieniaś Jarosław, Majerski Krzysztof, Ostapiuk Monika, Surowska Barbara // AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY - 2014, nr 4, vol. 86, s. 287-294 [MNiSW: 15]
Impact damage live-time analysis of modern composite materials using thermography / Jakubczak Patryk, Bieniaś Jarosław, Surowska Barbara // COMPOSITES THEORY AND PRACTICE - 2014, nr 4, s. 219-223 [MNiSW: 8] Interface analysis of fiber metal laminates / Ostapiuk Monika, Surowska Barbara, Bieniaś Jarosław // COMPOSITE INTERFACES - 2014, nr 4, vol. 21, s. 309-318 [MNiSW: 25] The issue of using remelted CoCrMo alloys in dental prosthetics / Walczak Mariusz, Beer-Lech Karolina, Surowska Barbara, Borowicz J. // ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING - 2012, nr 2, vol. 12, s. 171-177 [MNiSW: 15] Low-energy impact issues in GLARE laminates / Bieniaś Jarosław, Jakubczak Patryk, Surowska Barbara // COMPOSITES THEORY AND PRACTICE - 2013, nr 3, s. 165-169 [MNiSW: 8] Materiały kompozytowe stosowane w przemyśle lotniczym / Bieniaś Jarosław, Pałka Krzysztof, Ostapiuk Monika, Beer-Lech Karolina, Surowska Barbara // TWORZYWA SZTUCZNE W PRZEMYŚLE - 2011, nr 3, s. 70-75 The mechanical properties and failure analysis of selected fiber metal laminates / Bieniaś Jarosław, Majerski Krzysztof, Surowska Barbara, Jakubczak Patryk // COMPOSITES THEORY AND PRACTICE - 2013, nr 3, s. 220-224 [MNiSW: 8] Methods of ultrasonic testing, as an effective way of estimating durability and diagnosing operational capability of composite laminates used in aerospace industry / Bieniaś Jarosław, Jakubczak Patryk, Majerski Krzysztof, Ostapiuk Monika, Surowska Barbara // EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY - 2013, nr 3, vol. 15, s. 284-289 [MNiSW: 15] Numerical modeling of low-cycle fatigue of fiber reinforced composite / Majerski Krzysztof, Surowska Barbara, Bieniaś Jarosław // COMPOSITES THEORY AND PRACTICE - 2014, nr 4, s. 197-202 [MNiSW: 8] Odporność laminatów aluminium/kompozyt epoksydowo-szklany na uderzenia o małej prędkości / Jakubczak Patryk, Bieniaś Jarosław, Surowska Barbara // INŻYNIERIA MATERIAŁOWA - 2012, nr 6, s. 651-654 [MNiSW: 7] A quality assessment of casting dental prosthesis elements / Beer-Lech Karolina, Pałka Krzysztof, Surowska Barbara, Walczak Mariusz // EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY - 2013, nr 3, vol. 15, s. 230-236 [MNiSW: 15] Structure characteristics in glass/aluminum hybrid laminates after bending strength test / Ostapiuk Monika, Surowska Barbara, Bieniaś Jarosław, Majerski Krzysztof // COMPOSITES THEORY AND PRACTICE - 2013, nr 4, s. 237-240 [MNiSW: 8] Tensile properties of carbon fiber/epoxy laminates at low and room temperatures / Majerski Krzysztof, Surowska Barbara, Bieniaś Jarosław // KOMPOZYTY - 2012, s. 182-185 [MNiSW: 7] Wpływ powtórnego przetapiania na właściwości mechaniczne i mikrostrukturę odlewniczego stopu kobaltu / Beer-Lech Karolina, Walczak Mariusz, Surowska Barbara, Borowicz Janusz // INŻYNIERIA MATERIAŁOWA - 2012, nr 5, s. 473-476 [MNiSW: 7] Wpływ przygotowania powierzchni na wytrzymałość połączenia metal-kompozyt w laminatach FML / Bieniaś Jarosław, Surowska Barbara // INŻYNIERIA MATERIAŁOWA - 2011, nr 4, s. 341-343 [MNiSW: 7] Wpływ recyklingu na strukturę i właściwości wytrzymałościowe odlewniczego stopu kobaltu stosowanego w stomatologii / Surowska Barbara, Beer-Lech Karolina, Bieniaś Jarosław // ACTA MECHANICA ET AUTOMATICA - 2011, nr 3, vol. 5, s. 119-123 [MNiSW: 5] Wpływ technologii odlewania na jakość stomatologicznego stopu kobaltu / Surowska Barbara, Beer-Lech Karolina, Borowicz J., Veremchuk I. // POSTEPY NAUKI I TECHNIKI / ADVANCES IN SCIENCE AND TECHNOLOGY - 2011, nr 11, s. 81-88 [MNiSW: 4] Wytwarzanie i analiza strukturalna laminatów tytan-kompozyt wzmacniany włóknami węglowymi oraz szklanymi / Bieniaś Jarosław, Surowska Barbara, Ostapiuk Monika // INŻYNIERIA MATERIAŁOWA - 2012, nr 3, s. 210-214 [MNiSW: 7] Zastosowanie powłok SiO2-TiO2 w protetyce stomatologicznej / Walczak Mariusz, Bieniaś Jarosław, Surowska Barbara // POSTEPY NAUKI I TECHNIKI / ADVANCES IN SCIENCE AND TECHNOLOGY - 2011, nr 11, s. 98-106 [MNiSW: 4]
Referaty (30) Analysis of aluminium surface layer in evaluating the strength properties of Fiber Metal Laminates / Ostapiuk Monika, Bieniaś Jarosław, Surowska Barbara, Jakubczak Patryk, Majerski Krzysztof // W: 9th AIRTEC 2014, International Congress, 28-30 october 2014, Frankfurt, Germany : [book of abstracts] - 2014, s. 129-130 The analysis of failure of fibrous polymer composites and fibre metal laminates as a result of low-energy impact / Jakubczak Patryk, Bieniaś Jarosław, Surowska Barbara // W: ICCS17-17th International Conference on Composite Structures, 17-21 June 2013, Porto, Portugal : book of abstracts - 2013, s. 72-72 Comparison between low-velocity impact and quasi-static Indentation of Fibre Metal Laminates / Bieniaś Jarosław, Jakubczak Patryk, Surowska Barbara // W: ICCS17-17th International Conference on Composite Structures, 17-21 June 2013, Porto, Portugal : book of abstracts - 2013, s. 63-63 Comparison of polymer composites behavior on low-velocity impact and analogically quasi-static indentation / Bieniaś Jarosław, Jakubczak Patryk, Surowska Barbara // W: XX Physical Metallurgy and Materials Science Conference Advanced Materials and Technologies - AMT 2013, 9-12 June 2013, Kudowa Zdrój - 2013, s. 57-58 Complexity of Fiber Metal Laminates vs low velocity impact resistance / Jakubczak Patryk, Bieniaś Jarosław, Surowska Barbara, Ostapiuk Monika, Majerski Krzysztof // W: 7th International Conference "Supply on the Wings" Aerospace - a leading innovator, 6-8.11.2012, Frankfurt/Main, Germany - 2012, s. 30-30 Corrosion resistance of selected Fibre Metal Laminates investigation of mechanical properties / Ostapiuk Monika, Bieniaś Jarosław, Majerski Krzysztof, Surowska Barbara // W: AIRTEC 2013, International Aerospace Congress, 5-7 November 2013, Frankfurt/Main, Germany - 2013, s. 65-66 Corrosion studies of selected fibre metal laminates with carbon and glass fibres / Bieniaś Jarosław, Jakubczak Patryk, Majerski Krzysztof, Surowska Barbara, Antolak C. // W: 19th International Conference on Composite Materials, 28 July 2 August 2013, Montreal, Canada - 2013, s. 7810-7811 Degradacja laminatów metalowo-włóknistych w nisko-cyklowej próbie zmęczeniowej / Majerski Krzysztof, Surowska Barbara, Bieniaś Jarosław // W: XIV Konferencja Naukowo-Techniczna "Polimery i Kompozyty Konstrukcyjne" Kompozyty 2014, 7-10 października 2014, Gliwice Istebna 2014 [książka streszczeń] - 2014 Experimental and numerical investigations of low-velocity impact behavior of selected fibre metal laminates / Bieniaś Jarosław, Jakubczak Patryk, Surowska Barbara, Dębski Hubert // W: ECCM16-16th European Conference on Composite Materials, 22-26 June 2014, Seville, Spain - 2014, s. 1-6 Failure aspects of fiber metal laminates after low velocity and low energy impact / Bieniaś Jarosław, Jakubczak Patryk, Majerski Krzysztof, Ostapiuk Monika, Surowska Barbara // W: 19th International Conference on Composite Materials, 28 July 2 August 2013, Montreal, Canada - 2013, s. 294-295 Fatigue of unidirectional carbon Fiber Reinforced epoxy composites / Surowska Barbara, Bieniaś Jarosław, Dębski Hubert // W: 15th European Conference on Composite Materials - ECCM15, 24-28 June 2012, Venice, Italy - 2012, s. 1-7 Fiber metal laminates and their properties / Surowska Barbara, Bieniaś Jarosław, Majerski Krzysztof, Ostapiuk Monika, Jakubczak Patryk // W: 21th International Scientific Conference on Achievements in Mechanical and Materials Engineering AMME 13, 23-26 June 2013, Gliwice Kraków, Poland - 2013, s. 128-128 He effect of multiple low-velocity impact on fibre metal laminates / Jakubczak Patryk, Bieniaś Jarosław, Surowska Barbara // W: ECCM16-16th European Conference on Composite Materials, 22-26 June 2014, Seville, Spain - 2014, s. 1-4 Influence of fibers orientarion on the type of failure in Fiber Metal Laminates / Ostapiuk Monika, Majerski Krzysztof, Bieniaś Jarosław, Surowska Barbara, Jakubczak Patryk // W: 7th International Conference "Supply on the Wings" Aerospace - a leading innovator, 6-8.11.2012, Frankfurt/Main, Germany - 2012, s. 29-29
The influence of low temperatures on tensile behavior of Fiber-metal laminates / Majerski Krzysztof, Bieniaś Jarosław, Surowska Barbara // W: AIRTEC 2013, International Aerospace Congress, 5-7 November 2013, Frankfurt/Main, Germany - 2013, s. 36-36 Interface analysis of fibre metal laminates / Surowska Barbara, Bieniaś Jarosław, Ostapiuk Monika // W: International Conference on Composite Interfaces, 6-8.09.2012r., Kyoto, Japan - 2012, s. 1-4 Low-cycle fatigue of fiber-metal laminates - some aspects of finite element analysis / Majerski Krzysztof, Surowska Barbara, Bieniaś Jarosław // W: ECCM16-16th European Conference on Composite Materials, 22-26 June 2014, Seville, Spain - 2014, s. 1-1 Low-energy impact resistance of CFRP and Carbon Metal Laminates / Surowska Barbara, Bieniaś Jarosław, Jakubczak Patryk, Dragan Krzysztof // W: International Conference on Composite Interfaces, 6-8.09.2012r., Kyoto, Japan - 2012, s. 1-4 Low-temperature effect on the mechanical properties of glass- and carbon-reinforced/epoxy composites and FML / Bieniaś Jarosław, Surowska Barbara, Majerski Krzysztof // W: MCM-2012 17th International Conference on Mechanics of Composite Materials, 28.05-01.06.2012, Riga, Latvia :[ book of abstracts] - 2012, s. 58-58 Mechanical behaviour of hygrothermal conditioned fiber metal laminates / Surowska Barbara, Majerski Krzysztof, Bieniaś Jarosław, Kłosowski Grzegorz // W: ECCM16-16th European Conference on Composite Materials, 22-26 June 2014, Seville, Spain - 2014, s. 1-3 The mechanical properties and failure analysis of selected fibre metal laminates / Bieniaś Jarosław, Surowska Barbara // W: 15th European Conference on Composite Materials - ECCM15, 24-28 June 2012, Venice, Italy - 2012, s. 1-7 The mechanical properties and failure analysis of selected fibre metal laminates / Bieniaś Jarosław, Surowska Barbara // W: MCM-2012 17th International Conference on Mechanics of Composite Materials, 28.05-01.06.2012, Riga, Latvia :[ book of abstracts] - 2012, s. 59-59 Mechanical response of hygrothermal conditioned fiber metal laminates / Majerski Krzysztof, Surowska Barbara, Bieniaś Jarosław // W: 9th AIRTEC 2014, International Congress, 28-30 october 2014 : [book of abstracts] - 2014, s. 131-132 Mikrostruktura wybranych laminatów typu FML / Ostapiuk Monika, Surowska Barbara, Bieniaś Jarosław // W: Materiały Konferencji Młodych Naukowców nt.: Wpływ Młodych Naukowców na Osiagnięcia Polskiej Nauki VII Edycja Dotyczy sesji: 6.12.2014 roku w Krakowie, 13.12.2014 w Łodzi : streszczenia - 2014, s. 356-356 Modeling of low cycle fatigue of titanium hybrid laminates / Majerski Krzysztof, Surowska Barbara, Bieniaś Jarosław // W: ACEX 2014, 30 June - 3 Jule, Paris, France: [book of abstracts] - 2014, s. 134-134 Połączenie metalu z polimerem w laminatach typu FML / Ostapiuk Monika, Bieniaś Jarosław, Surowska Barbara, Majerski Krzysztof // W: XIV Konferencja Naukowo-Techniczna "Polimery i Kompozyty Konstrukcyjne", Kompozyty 2014, 7-10 października 2014, Gliwice Istebna 2014 [książka streszczeń] - 2014 Strength properties of fibre metal laminates in low temperature environment / Bieniaś Jarosław, Majerski Krzysztof, Surowska Barbara // W: ICCS17-17th International Conference on Composite Structures, 17-21 June 2013, Porto, Portugal : book of abstracts - 2013, s. 161-161 Structure characteristics in glass/aluminum hybrid laminates after bending strength test / Bieniaś Jarosław, Surowska Barbara, Ostapiuk Monika, Majerski Krzysztof // W: XX Physical Metallurgy and Materials Science Conference Advanced Materials and Technologies - AMT 2013, 9-12 June 2013, Kudowa Zdrój - 2013, s. 67-67 Wpływ mikrostruktury warstwy wierzchniej stopu aluminium w ocenie właściwości materiału hybrydowego / Ostapiuk Monika, Bieniaś Jarosław, Surowska Barbara, Majerski Krzysztof // W: IX Konferencja Naukowa: Inżynieria Powierzchni INPO 2014, 7-10 września 2014r., Wisła Jawornik - 2014, s. 33-34 X-Ray computed microtomography analysis of polimer foam structure deformation during compression / Surowska Barbara, Ostapiuk Monika, Bieniaś Jarosław, Pyrz R. // W: 6th International Conference on Advanced ComputationalEngineering and Experimenting ACEX2012, 01-04 July, 2012,Istanbul, Turkey - 2012, s. 27-27
Rozdziały (3) Analiza porównawcza wybranych metod identyfikacji porowatości w kompozytach polimerowych / Ostapiuk Monika, Bieniaś Jarosław, Surowska Barbara // W: Polimery i kompozyty konstrukcyjne : monografia, [Red:] Wróbel Gabriel - Cieszyn ; Gliwice: Wydawnictwo Logos Press, 2011, s. 350-351 Wytwarzanie kompozytów metodą autoklawową i ocena ich jakości / Surowska Barbara, Bieniaś Jarosław // W: Polimery i kompozyty konstrukcyjne : monografia, [Red:] Wróbel Gabriel - Cieszyn ; Gliwice : Wydawnictwo Logos Press, 2011, s. 488-500 Wytwarzanie, struktura i właściwości kompozytów metalowo-włóknistych / Bieniaś Jarosław, Surowska Barbara, Ostapiuk Monika // W: Polimery i kompozyty konstrukcyjne : monografia, [Red:] Wróbel Gabriel - Cieszyn ; Gliwice: Wydawnictwo Logos Press, 2011, s. 24-25