/2011. PPUH FRISTOM Tomasz Frieske ul. Byszewska 54a, Bydgoszcz, Poland. Optical-electric part of LED working lamp

Wielkość: px

Rozpocząć pokaz od strony:

Download "/2011. PPUH FRISTOM Tomasz Frieske ul. Byszewska 54a, Bydgoszcz, Poland. Optical-electric part of LED working lamp"

Kazimierz Matysiak
6 lat temu
Przeglądów:

1 Zał. nr 4 O-TÜV-2 Strona age: 1 Stron ages: 6 Zleceniodawca: Client: rzedmiot badania: Test item: roducent / Klient zew.: Manufacturer / ext. Customer: UH RISTOM Tomasz rieske ul. Byszewska 54a, Bydgoszcz, oland Optical-electric part of LED working lamp UH RISTOM Tomasz rieske ul. Byszewska 54a, Bydgoszcz, oland Oznaczenie: Identification: part of lamp T-036, T-036B Nr seryjny: Serial No.: - rzyjęcie towaru nr: Receipt No.: /11/594 Data przyjęcia: Date of receipt: Miejsce kontroli: Testing location: odstawa badań: Test specification: TÜV Rheinland olska Sp. z o.o. ul. Łukaszewicza 43, oznań, oland N-EN 60529:2003 Stopnie ochrony zapewnianej przez obudowy (Kod I) Degrees of protection provided by enclosures (I code) Degree of protection provided by sample enclosure I 68 0,9m. Wynik badania: Test Result: rzedmiot badania odpowiada w/w podstawie(om) badawczej(ym). The test item passed the test specification(s). Opracowane / compiled by: Autoryzowane / authorized by T. Rutkowski M. Bak data Date nazwisko Name podpis Signature data Date nazwisko Name Inne / Other Aspects: podpis Signature Szczegóły konstrukcyjne => patrz Identyfikacja przedmiotów badań oraz Dokumentacja fotograficzna. Details of construction => see the Identification of test item and hotodocumentation. The report was prepared on the basis of a report no. 122/LBS-900/21/2011. Skróty: (ass) = zgodne z podstawami kontroli (ail) = niezgodne z podstawami kontroli = nie dotyczy = nie badano Abbreviations: (ass) = passed (ail) = failed = not applicable = not tested Raport z badań odnosi się wyłącznie do badanych obiektów i nie może być powielany w formie wyciągu bez zezwolenia Laboratorium. Raport nie upoważnia do korzystania ze znaków oraz logo firmy TÜV Rheinland Group. A - metoda akredytowana, - podwykonawstwo This test report relates to the a. m. test samples. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not allow use marks and logo of TÜV Rheinland Group. A - accredited method, - subcontracting Laboratorium Badawcze TÜV Rheinland olska ul. Łukaszewicza 43, OZNAŃ, tel./fax: , Druk O-TÜV-2/4 wyd. VIII

2 Zał. nr 4 O-TÜV-2 roduct Safety and Quality Strona age: 2 Stron ages: 6 Stosowane przyrządy/urządzenia pomiarowe Used measuring equipment omiar Measurement Numer urządzenia Equipment No. Data następnej kalibracji Next calibration date Dimensions A/221/W/ A/272/W/ A/273/W/ Environmental conditions A/284/W/ Laboratorium Badawcze TÜV Rheinland olska ul. Łukaszewicza 43, OZNAŃ, tel./fax: , Druk O-TÜV-2/4 wyd. VIII

3 Zał. nr 4 O-TÜV-2 roduct Safety and Quality Strona age: 3 Stron ages: 6 Identyfikacja przedmiotu badań Identification of test item According to information from manufacturer, optical-electric part is used in LED working lamp models T-036, T-036B. The lamp have 9 LEDs, connection cable length is 1.45 m. Ratings: - working voltage V, - rated power 15 W. Image 1 Optical-electric part of lamp Laboratorium Badawcze TÜV Rheinland olska ul. Łukaszewicza 43, OZNAŃ, tel./fax: , Druk O-TÜV-2/4 wyd. VIII

4 Zał. nr 4 O-TÜV-2 roduct Safety and Quality Strona age: 4 Stron ages: 6 N-EN 60529:2003 () 11 General requirements for tests 11.1 Atmospheric conditions for water or dust tests The recommended atmospheric conditions during the tests are as follows: Temperature range: 15 C to 35 C Relative humidity: 25 % to 75 % Air pressure: 86 ka to 106 ka 11.2 Test Samples - the number of samples to be tested (not requirement), - the pre-conditioning (not requirement), - whether to be tested energized or not (not requirement), t 0 19 C h 47 % p 100,5 ka one sample; t 0 19 C, h 47 %; not energized; 12 Tests for protection against access to hazardous parts indicated by the first characteristic numeral Test equipment used for verification The test is made with 1,0 mm diameter access probe length 100 mm 12.2 Test conditions The access probe is pushed against openings in the enclosure with a force of (1 ± 0,1) N 12.3 Acceptance conditions Distance between test probe and hazardous parts shall be equal to: - for low-voltage equipment (U < V a.c. or U < V d.c.) the access probe shall not touch hazardous live parts of the equipment - or high-voltage equipment (U > V a.c. or U > V d.c.) clearance between test probe and bare live parts shall provide adequate insulation resistance for test voltage specified in international standard for that type of equipment - the access probe shall not touch hazardous mechanical parts. 13 Tests for protection against solid foreign objects indicated by the first characteristic numeral Test equipment used for verification Talcum powder which is able to pass through a square-meshed sieve the nominal wire diameter of which is 50 µm and the nominal width of the gap between wires 75 µm. Access probe did not penetrate tested sample Laboratorium Badawcze TÜV Rheinland olska ul. Łukaszewicza 43, OZNAŃ, tel./fax: , Druk O-TÜV-2/4 wyd. VIII

5 Zał. nr 4 O-TÜV-2 roduct Safety and Quality Strona age: 5 Stron ages: Test description - subatmospheric pressure not exceeding 2 ka was achieved inside the enclosure (all enclosures are treated as category 1 enclosure)* - talcum powder was sprayed and maintained in suspension state inside dust chamber - duration of test: form 2 to 8 hours * Tested sample is totally sealed by sealing mass and there is no possible to make subatmospheric pressure inside the sample.. Test duration 8 hours Acceptance conditions for first characteristic numeral 6 The protection is satisfactory if no deposit of dust is observable inside the enclosure at the end of the test. No deposit of dust inside the sample 14 Tests for protection against water indicated by the second characteristic numeral Test means - water witch temperature do not differ from temperature of tested object by more than 5 K Test description - total submersion in water enclosure in specific by manufacturer position - the level of submersion of according to product norm or be settled by manufacturer; 1.3 x 900 mm - the time of duration of test - 60 min 14.3 Acceptance conditions - no water inside the enclosure or - if any water is inside the enclosure it shall not to: be sufficient to interfere with the correct operation of the equipment or impair safety of the tested object - deposit on insulation parts where it could lead to tracking along the creepage distances - enter live parts or windings not designed to operate when wet - to accumulate near the cable ends or enter the cable if any - if enclosure is provided with drain holes any water which enters inside shall be able to accumulate and it drains away without doing any harm to the equipment.. Submersion level 1200 mm, duration 60 min. No water inside the sample. Before and after the I68 test there was measured resistance insulation value between connected together supply conductors and metal radiator applying solid tension 500 V by 1 minute. The value of resistance before and after submersion test was 100 MΩ. After test lamp was supplied by 12V d.c. and all LED were lighting. Laboratorium Badawcze TÜV Rheinland olska ul. Łukaszewicza 43, OZNAŃ, tel./fax: , Druk O-TÜV-2/4 wyd. VIII

optical-electric part of lamp oto 3 roduct overview oto 4 Nazwa zdjęcia Koniec raportu End Laboratorium

6 Zał. nr 4 O-TÜV-2 roduct Safety and Quality Strona age: 6 Stron ages: 6 Załącznik nr 1 / Annex No 1 Dokumentacja fotograficzna hotodocumentation oto 1 roduct overview oto 2 roduct assembly drawing optical-electric part of lamp oto 3 roduct overview oto 4 Nazwa zdjęcia Koniec raportu End Laboratorium Badawcze TÜV Rheinland olska ul. Łukaszewicza 43, OZNAŃ, tel./fax: , Druk O-TÜV-2/4 wyd. VIII

Podobne dokumenty

DELTIM Sp. z o.o. S.K.A ul. Rząsawska 30/38; Częstochowa. Bumper bar X-Lander X-Move

Strona Page: 1 Zleceniodawca: Client: DELTIM Sp. z o.o. S.K.A ul. Rząsawska 30/38; 42-209 Częstochowa Przedmiot badania: Test item: Bumper bar X-Lander X-Move Producent / Klient zew.: Manufacturer / ext.